Siemens 17 Replacement Parts And Instruction Manual

IMPORTANTTHESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS INEQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET INCONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULDFURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISEWHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES, THEMATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF ORMODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP.THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THEWARRANTY CONTAINED IN THE CONTRACT BETWEEN PARTIES IS THE SOLEWARRANTY OF SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATENEW WARRANTIES OR MODIFY THE EXISTING WARRANTY .Combination Starters, Classes 17, 18, 25, 26 and 32Starter Sizes 0 - 4Replacement Parts and Instruction GuideE87010-A0137-T003-A4August 2020Supersedes Issue ofJune 2015Siemens Industry, Inc. 3617 Parkway Ln, Peachtree Corners, GA 30092 www.usa.siemens.com A5E31166526A-003Hazardous voltage.Will cause death, serious personal injury,or property damage.SIGNAL WORDSThe signal words “Danger”,“Warning” and “Caution”used in this manual indicate the degree of hazard thatmay be encountered by the user.These words are defined as below:Danger - Indicates death, severe personal injury orproperty damage will result if properprecautions are not taken.Warning - Indicates death, severe personal injury, orproperty damage can result if properprecautions are not taken.Caution - Indicates personal injury or propertydamage may result if proper precautionsare not taken.Short-Circuit Explosion Hazard. Can cause death, seriouspersonal injury, or property damage. Fully engage alldoor latches and spread ends of door hinge pinsapproximately 45 degrees before energizing equipment.QUALIFIED PERSONFor the purpose of this manual and product labels aqualified person is one who is familiar with the installa-tion, construction, operation, or maintenance of theequipment and the hazards involved. In addition thisperson has the following qualifications:(a) is trained and authorized to energize,de-energize, clear, ground, and tag circuitsand equipment in accordance with establishedsafety practices.(b) is trained in the proper care and use ofprotective equipment such as rubber gloves,hard hat, safety glasses or face shields, flashclothing, etc., in accordance with establishedsafety practices.(c) is trained in rendering first aid.Always de-energize and ground the equipment beforemaintenance. Read and understand this manual beforeinstalling, operating or maintaining the equipment.Maintenance should be performed only by qualifiedpersonnel. The use of unauthorized parts in the repair ofthe equipment or tampering by unqualified personnel mayresult in dangerous conditions which may cause death orserious personal injury or equipment or property damage.Follow all safety instructions contained herein.s