Sharp XL-HP404E Operation Manual

Also see for XL-HP404E: Operation manual Quick start guide

03/10/20 XL-HP404E(A)2.fm11XL-HP404ETINSEA009AWZZPreparation for UseRemote control! Battery installationPrecautions for battery use:" Replace all old batteries with new ones at the same time." Do not mix old and new batteries." Remove the batteries if the unit is not to be used for long periodsof time. This will prevent potential damage due to battery leak-age.Caution:" Do not use rechargeable batteries (nickel-cadmium battery, etc.)." Installing the batteries incorrectly may cause the unit to malfunc-tion.Notes concerning use:" Replace the batteries if the operating distance is reduced or if theoperation becomes erratic." Periodically clean the transmitter on the remote control and thesensor on the unit with a soft cloth." Exposing the sensor on the unit to strong light may interfere withoperation. Change the lighting or the direction of the unit." Keep the remote control away from moisture, heat, shock, andvibrations.! Test of the remote controlCheck the remote control after checking all the connections (seepages 8 - 10).Point the remote control directly at the remote sensor on the unit.The remote control can be used within the range shown below:Press the ON/STAND-BY button. Does the power turn on? Now,you can enjoy music.Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).Batteries are not included.1 Remove the battery cover.2 Insert the batteries according to the direction indicated inthe battery compartment.When inserting or removing the batteries, push them towards thebattery terminals.3 Replace the cover.0.2 m - 6 m(8" - 20')Remote sensorXL-HP404E(A) TINSEA009AWZZ 32