Menu
Sharp XG-V10XE Operation Manual
Also see for XG-V10XE: Operation manualService manual
                                                                                            |
70Maintenance &TroubleshootingConfirming the Lamp Usage TimeLamp MaintenanceLampThe lamp in this projector operates for approximately 1,000 cumulative hours, depending on the usage environ-ment. (As the usage environment can vary significantly, the projector lamp may not operate for 1,000 hours.) It isrecommended that the lamp be replaced after approximately 900 cumulative hours of use or when you notice asignificant deterioration of the picture and colour quality. The lamp usage time can be checked with the On-screenDisplay.CAUTION• Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating.This function allows you to check the accumulated lampusage time.(Slide the MOUSE/ADJUSTMENT switchon the remote control to the ADJ. position.)1 Press MENU.2 Press ß/© to select “Options (2)”.3 Press ∂/ƒ to select “Lamp Timer”. The lampusage time will be displayed.4 To exit from the GUI, press MENU.• It is recommended that the lamp be replaced afterapproximately 900 cumulative hours of use. See pages 71and 72 for lamp replacement.1.2.3 4.5.61, 42, 3ProjectorMOUSE ADJ.Remote Control(GUI) On-screen DisplayProblem• Lamp has been used for over 900hours.• Lamp has been used for over 1,000hours.Possible Solution• Purchase a replacement lamp unit(lamp/cage module) of the currenttype BQC-XGV10WU/1 from yournearest Sharp Authorised LCDProjector Dealer or Service Centre.• Replace the lamp. (See pages 71and 72.) If you wish, you may havethe lamp replaced at your nearestSharp Authorised LCD ProjectorDealer or Service Centre.ConditionThe LAMP REPLACEMENTindicator lights up red, and “LAMP”and “ ” will flash in yellow in thelower-left corner of the picture.A significant deterioration of thepicture and colour quality occurs.The power will automatically turnoff and the projector will enterstandby mode.“LAMP” and “ ” will flash in red inthe lower-left corner of the picture,and the power will turn off. |
Related manuals for Sharp XG-V10XE
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved