Menu
Sharp XG-NV51XM Operation Manual
                                                     |
19OperationBasic Operations7 Adjusting the Volumea. Press VOLUME /VOLUME on the projectoror the “Power” remote control to adjust the volume.b. Press MUTE on the projector or the “Power”remote control to temporarily turn off the sound.Press MUTE again to turn the sound back on.8 Turning off the Power1. Press POWER OFF on the projector or the“Power” remote control. The screen on the left willappear.2. Press POWER OFF again while the screen isdisplayed.• If you accidentally pressed POWER OFF and do not wantto turn off the power, wait until the power off screen shownon the left disappears.When POWER OFF is pressed twice, the POWER indicatorwill light up red and the cooling fan will run for about 90seconds. The projector will then enter standby mode.The power can be turned on again by pressing POWERON on the projector or the “Power” remote control. Whenthe power is turned on, the POWER indicator and the LAMPREPLACEMENT indicator light green.7b7a• The POWER indicator flashes if the bottom filter cover isnot securely installed.86 Selecting and Checking the InputModePress INPUT on the projector or the “Power” remotecontrol to select the desired input mode. Press it againto change the mode as shown on the left.• When no signal is being received, “No Signal” will bedisplayed. When a signal that the projector is not preset toreceive is being received, “Not Reg.” will be displayed.• The picture size and aspect ratio differ in “COMPUTER”,“PAL”, “SECAM” and “NTSC” modes.ProjectorONMUTETOOLSR-CLICK ENTERINPUT IrCOMFREEZE AUTO SYNCMENULASERBLACKSCREENVOLOFF7a7b86To view the image from asource connected to:COMPUTER INPUT 1COMPUTER INPUT 2On-screen DisplaysfVIDEO INPUTf |
Related manuals for Sharp XG-NV51XM
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved