Sharp TU-R162H Operation Manual

162.1.4. CHECK CONFLICTSA conflict is caused, if more than two programmes are set for recording in the same time interval or iftwo reminders have the same starting time (For more information, please refer to section 2.1.7.). In theEPG menu, press OK. In the following window, select the option “Check Conflicts” and press againOK. You will enter the “Too Many Timers” window.2.1.5. SET REMINDER / DELETE REMINDERIn EPG menu, after you have selected a programme, press OK and select the “Set Reminder” optionin the menu which appears and press OK again. You can set a reminder for future programs.To cancel an already set reminder, highlight that programme and press OK and select the option“Delete Reminder”. The reminder will be cancelled.2.1.6. SPLIT RECORDIf you select a programme to be recorded, with this feature, if there is another part of the programmeavailable, it will also be set automatically to be recorded. For example in the following picture you seethe programme with a red underline and the following episode is also underlined. To perform thisfunction, you only have to press RECORD once.Note: Split programme information is broadcasted by the broadcaster.If the "Split Record" feature is unavalaible, this is not a fault with your unit.A programme may consist of multiple events as signalled by the broadcaster (for example, a filmdivided into two parts by a news programme would be three events). Broadcaster Signalling carried inthe data allows the recorder to identify and record the events containing the parts of a singleprogramme.If the DTR does not show the split record option and just sets the single record for any programme,the programme has no identified split record data sent by Broadcaster.The split record function is not always available.