Keep the machine well balanced during liftingprocess and make sure the wire rope does notinterfere with the saw frame. When you work together with more than twopeople, it is best to keep constant verbalcommunication with each other.2. Use a forklift (Only applies to the machine with the design of the lifting point.)Make sure that the lifting rod can fully withstand the weight of the machine. (Refer to Section 2 –General Information for Specifications.)Machine lifting with a forklift should be done strictly according to the lifting pointsdesignated by the original manufacturer. If there is any doubt on missing lifting points on your machine,please consult with the original manufacturer or its qualified agent before lifting the machine. Machine lifting is likely to damage the machineif not performed properly.You must have a qualified forklift operatorto perform the job. You must apply proper forklift technique toavoid damage to the machine.Make sure the forks are able to reach inat least 2/3 of the machine depth.
