Menu
Sharp SPC876 Instruction Manual
  |
RADIO CONTROLLEDATOMIC WALL CLOCKInstruction ManualThank you for your purchase. The utmost care has gone into the design and manufacture of your clock. Please read theseinstructions carefully and store them in a safe place for future reference.Buttons and Switches:A. SET Button: Press to Manually Set the Time. See Point 8; Please ensure sufficient time has passedovernight to receive atomic signal prior to manual setB. WAVE Button: See Point 7C. RESET Button: Press to reset if clock needs resettingD. TIME ZONE Switch: See Point 2aE. DST ON/OFF Switch: See Point 2b1. Quick Start Notes:a. Start this clock at night and let the clock receive the atomic signal automatically after midnight.b. Always place the unit away from interfering source such as TV set, computer, metal objects andelectrical appliances.c. Areas with access to windows are recommended for better reception.2. Set Time Zone & Daylight Savings Time (DST):a. On the back control panel: Set the clock to your time zone by moving the indicator arrow toappropriate zone: P (Pacific Time), M (Mountain Time), C (Central Time), E (Eastern Time)b. Enable the Daylight Savings Time Auto Adjust feature by moving the DST switch to “ON”. Ifyou are in a time zone that does not follow DST, make sure you set the DST mode to “OFF”.The Daylight Savings Time feature is disabled when the switch is set to “OFF”.3. Initial Set-Up: Insert one AA alkaline battery into the battery holder. This will activate the atomic radioreception mode and the second, minute and hour hands will automatically reset to the 12:00 position.Once the hands are in the 12:00 position, the movement will start searching for the radio signal. Thesearch procedure takes approximately 3 to 10 minutes after all hands have set to the 12:00 position. If asignal is found within the first 3 to 10 minutes, the clock will set to the correct time. If the clock does notreceive a radio signal soon after activated, the clock will start running from the 12:00 position and willcontinue to run. In this case, do not attempt to reset the hands manually even though the time displayedon the clock is incorrect. The clock is synchronizing to the WWVB signal and once the radio signal isdecoded, the hands will automatically adjust to the correct time. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved