1SPECIAL WARNINGINSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR’S USE.READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.CLEARANCES AND DIMENSIONSFor SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the statedclearances and dimensions on pages 2 - 5. See Figures 1 - 7.Sharp Microwave Drawer ™ Oven: SMD2489ES, SMD2479JSINSTALLATION MANUALUNPACKING YOUR MICROWAVE DRAWER• Remove a l l pa ck i ngmaterials from inside theMicrowave Drawer. DONOT R EMOVE THEWAVEGUIDE COVER,which is located on thetop of the MicrowaveDrawer.• Remove the feature stick-er, if there is one. Checkthe drawer for any dam-age, such as misalignedor bent drawer, damageddrawer seals and seal-ing surfaces, broken orloose Microwave Drawerguides and dents insidethe cavity or on the front side of the drawer. If there is any damage,do not operate the Microwave Drawer and contact your dealer ora SHARP AUTHORIZED SERVICER.IMPORTANT NOTES TO THE INSTALLER• Read all of the Installation Manual before installing theMicrowave Drawer.• Remove all packing material before connecting the electricalsupply.• Observe all governing codes and ordinances.• Be sure to leave these instructions with the consumer.IMPORTANT NOTES TO THE CONSUMERKeep this manual with your Operation Manual for future reference.• As when using any microwave oven generating heat, there arecertain safety precautions you should follow. These are listedin the Operation Manual. Read all and follow carefully.• Be sure your Microwave Drawer is installed and groundedproperly by a qualified installer or service technician.• This unit comes equipped with a Wi-Fi connectivity option.In order to activate the Wi-Fi functionality, the area in whichthe unit is installed requires a Wi-Fi signal. Please see theoperation manual for the minimum Wi-Fi specifications.IMPORTANT SAFETY INSTRUCTIONSIf the information in this manual is not followedexactly, a fire or electrical shock may result that could cause propertydamage, personal injury or death.To reduce the risk of tipping, the Microwave Drawermust be secured by a properly installed Anti-Tip block.• This Microwave Drawer must be electrically grounded inaccordance with local codes.• Make sure the wall coverings and the cabinets around theMicrowave Drawer can withstand the heat generated by theMicrowave Drawer.NEVER LEAVE CHILDREN ALONE OR UNAT-TENDED IN THE AREA WHERE A MICROWAVE DRAWERIS IN USE. NEVER LEAVE THE DRAWER OPEN WHEN THEMICROWAVE IS UNATTENDED.STEPPING, LEANING OR SITTING ON THEDRAWER MAY RESULT IN SERIOUS INJURIES AND CANALSO CAUSE DAMAGE TO THE MICROWAVE DRAWER.• Do not use the Microwave Drawer as a storage space. Thiscreates a potentially hazardous situation.• Check that the time-of-day is in the display. If not, touch STOP/CLEAR for safety reasons and to prevent unintended use.1WaveguideCoverSealingSurfaceOvenCavitySealingSurface