Sharp SM-207H Operation Manual

Connect the AC supply lead only to outlets providing AC220V (50/60 Hz) power.Should power with a rating other than 220V(50/60 Hz) beused, the unit may operate improperly, or become a fire orshock hazard.Use of the AC supply lead. Misuse of the AC supply leadwill result in breakage, fire or accidental electric shock.e@Always take a firm grip on the plug when removing the ACsupply lead from the outlet. Never pull the plug from theoutlet by gripping the lead.@Do not place any heavy object on the AC supply lead. Donot excessively bend the AC supply lead. Do not place ina position where it will be stepped on.Do not use or place the unit where the humidity is high asthis will result in malfunctioning or electric shock.Do not expose the unit to high temperatures, for example, indirect sunlight or close to heaters. This will cause the plasticparts to warp and thus cause the unit to malfunction.Do not use or place the unit where there is excessive dust as .this will cause malfunctioning. Special attention should bepaid to records a$ they are prone to attract dust due to staticelectricity.Do not expose the unit to extremely cold temperatures asthis will cause the unit to malfunction.When positioning the unit, a firm, level base should be select-ed. Be careful not to allow the unit to fall.Do not remove the cabinet.There are dangerous high voltages inside. In the event thattrouble develops inside the unit, please contact the dealerfrom whom you purchased the unit.Do not place cassette tapes or the unit near or in magneticfields such as magnets, television set or speakers. This willresult in noise or erasure of the tape.Do not place the speakers so they face the unit or are. tooclose together; this can cause howling affected by thespeaker’s sounds when a record is playing.Stack the units as shown in the illustration.Stereo AmplifierStereo TunerStereo Cassette DeckStereo TurntableMuting Button: MUTINGGraphic Equalizer Controls: GRAPHIC EQUALIZERMicrophone Mixing Volume Control: MIC MIXINGBalance Contro!: BALANCEFunction Selector |ee . Switches and IndicatorsMicrophone Socket: MICHeadphones Socket: PHONESPower Switch: POWERBanneersMTEE Mics, sermeecn commas” 4Ai; aom[E]1Power Indicator: POWERVolume Control: VOLUMEMuting Indicator: MUTINGLoudness Switch: LOUDNESS