Sharp SL-5500 Startup Manual

Also see for Zaurus SL-5500: Supplementary guide Installation guide Quick start guide Software guide Software guide

Contents

Troubleshooting 75The alert message is displayed indicating that the back-up battery isexhausted.The built-in rechargeable back-up battery is almost exhausted.Connect the AC adapter to the SL-5500 for more than 30 hours or insert a fullycharged battery (EA-BL06) into the SL-5500 for more than 30 hours. The back-upbattery will be charged to its full capacity.If the alert message still appears, contact your local SHARP dealer for repair.Software reset can not be completed by switching the Batteryreplacement switch to the “REPLACE BATTERY” position and thenback to the “NORMAL OPERATION” position.Perform software reset with the SL-5500 turned on.If you switch the Battery replacement switch to the “REPLACEBATTERY” position with the unit turned on, the display screendisappears gradually with display fluctuation.This is not a malfunction. This unit is designed to protect the unit’s data.The CF (or SD) card icon will not disappear from the taskbar bytapping the icon and then tapping “Eject card” (or “Eject SD-card”).The operation (“Eject card” or “Eject SD-card”) is not valid if any files on a memorycard are open, or if a modem card, etc. is in use.Pressing the Home key to display the Home screen while adjustingsettings in the Date/Time, Light & Power applications, etc. invalidatesthe settings.Save the setting and close the application first by tapping or pressing ,then display the Home screen. Pressing the Home key does not save it.Not sure what kind of device is to be used for the SL-5500.For information regarding the devices, etc., visit our Web site. (See page 79,“Product Support”)00 Cover.book Page 75 Saturday, January 19, 2002 11:33 AM