Sharp SABK2002I Operation Manual

Also see for SA-BK2002I: Operation manual

Home AppliancesEN-6ENFunction instructionThis kettle has three kinds of function: boiling water, keep warm and boiling extend.Function setting1. State instruction:There are two states for this electric kettle: setting state and working state. At settingstate, the icon of the function which is selected will be light and then parameterscan be set. At working state, the icon of working function is flashing. Set watertemperature is shown on LCD.2. Control panel instruction:At setting stage, the set parameter will increase after pressing . When parameteris at the max, it will go back to the min. If you press on all the time, parameterincreases continuously.At setting stage, the set parameter will reduce after pressing . When theparameter reaches the min, it will go back to the max; If you press all the time,parameter reduces continuously.At setting stage, change function by pressing will change to the selected function.Press and unit will go to working state or back to setting state.3. Parameter setting instruction:With power on, default setting of above three functions are as follow: boiling waterto 100, boiling extend to 3s. Press the switch to other parameter settings and thecorresponding icon will be light.a) When set to boil parameter, the water temperature can be adjusted from 40oC to100 oC; by 5oC intervals.b) When set to keep warm temperature, the kettle can be adjusted from 40oC to90 oC; by intervals of 5oC; Keeping warm is up to 30 mins. If you do not need tokeep warm, set parameter to “0”, (Keep warm temperature should be lowerthan boiling water temperature, otherwise unit will adjust it by itself.)c) When set to boiling extend, extend time can be adjusted from 3s to 6s. (This set iseffective only based on boiling water temperature is higher than 95oC.)Kettle_OM_6_Languages.indb 6 2017-12-28 15:25:12