Sharp Plasmacluster IG-GC2A Operation Manual

Contents

E-8ENGLISHCLEANING AND MAINTENANCEFILTER Frequently as necessaryThe filter must be cleaned regularly in order to maintain the ion density. Filtersoiling depends on the usage environment, so clean the filter frequently asnecessary. With frequent cleaning, Plasmacluster ions can be released efficiently.Open CloseOpen CloseMain Unit CoverFilter Cover1 Rotate the filter cover to the leftto fit “ ” on the main unit coverand “ ” on the filter cover.2 Pull the filter cover downwardand remove.132Filter FilterDismantle the filters andremove dust with a vacuumcleaner.• If the filter is dirty, simplywash with water.• Do not press the vacuum cleaner strongly against the filter,or the filter could be damaged.• If using synthetic kitchen detergent, rinse well to remove all tracesof the detergent. Also, be sure to dry the filter in the shade.• Dry the product in a shaded area so that water drops do notremain in the gap between the filter cover and the fi lter.Note1 Attach the filter back tothe filter cover. (Insert thefilter to the upper claw andlower claw)2 Reattach the filter cover.Filter CoverUpper ClawFilterLower ClawWipe with a dry soft cloth. Use water and a mild detergent. And then, wipe with a wet cloth. Make sure todry out the main unit.MAIN UNIT Every month or more often if necessaryIG-GC2_EN.indd 8IG-GC2_EN.indd 8 6/30/2559 BE 10:42 AM6/30/2559 BE 10:42 AM

/ 28

This manual is suitable for:

Plasmacluster IG-GC2A

Sharp Plasmacluster IG-GC2A Operation Manual

Product

Learn More

Legal