Sharp PN-ZB03H Operation Manual

PN-ZB03HOperation Manual HDBaseT Receiver BoardApplicable models(as of May 2016)LCD MONITORPN-R556/PN-R496/PN-R426Available models differ according to region.CAN ICES-3 (A) / NMB-3 (A)• THaNk yOu fOR PuRcHasiNg a sHaRP PRODucT.Before using the product, please be sure to read this operation manual carefully. In particular, be sure to read thesection “To ensure safe and correct use”. After reading the manual, keep it in a convenient location where it can beaccessed at any time.As for how to use the product, refer to the operation manual of the LCD MONITOR.TiPs- This product was shipped after strict quality control and inspection; however, if breakage or a malfunction should be found, contact your SHARP dealeror your nearest customer contact.- Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any othermalfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.- This product and its accessories may be upgraded without advance notice.IMPORTANT:To aid reporting in case of loss or theft, please record the product’s model andserial numbers in the space provided.The numbers are located on the product.Model No.:Serial No.:U.S.A. ONLYWaRNiNg:FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void theuser’s authority to operate this equipment.NOTE:This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipmentgenerates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the userwill be required to correct the interference at his own expense.U.S.A. ONLYThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation.U.S.A. ONLYWaRNiNg:This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to takeadequate measures.To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB terminal, HDBaseT terminal.To ensure safe and correct useThis operation manual and the product use various displays and labels to ensure safe use. Ignoring these displays and labels and incorrectly using theproduct could have results as classified below.Please read the following warning symbol information before reading the rest of this section, and be sure to strictly observe all instructions.Warning: Not following these instructions could result in death or serious injury.• Ask your SHARP dealer or qualified service person for the attachment/detachment of this product.Attachment/detachment of this product by the customer may result in electric shock or injury.• Never try to modify, disassemble, or repair this product.Doing so may result in fire, electric shock, or injury.• Only use the accessories with specified models.Failure to do so may result in fire.CINSE1411MP51 (1)

/ 2

Related manuals for Sharp PN-ZB03H