Sharp PN-V601A Brochure & Specs

Also see for PN-V600A: Operation manual Setup manual Setup manual

Contents

video walls

RS-232C output Control kit jackAudio inputAudiooutputRS-232CinputPC/AVinput (HDMI) Optional portPC analogueinput RGB(D-sub)PC/AV inputdigital RGB(DVI-D)PC/AV outputdigital RGB(DVI-D)LANExternalspeakersAudioinputPC analogue input RGB (BNC)Component videoinput (BNC)Video input (BNC)S-Video inputDimensions1,335.9 (52 5 /8)92.3(3 5/8 )58.3(2 1/4 )149.3(5 7 / 8 ) 124.3(4 7 /8 )27.2 (1 1 / 8 )30 (1 1 /8 )200 (7 7 /8 )200 (7 7 /8 )200 (7 7/8 ) 200 (7 7 /8)VESA holes*754.2 (29 11 /16 )747.7*(29 3/ 8 )373.9(14 3 /4)664.7 (26 1 /8)668.8 (26 3 / 8)667.1 (26 1/ 4)1,329.4* (52 3 /8 )Units: mm (inch)* Screen dimensions* To use the VESA-standard mounting bracket, use M6 screws that are 8 to 10 mm plus the thickness of the bracket.*1 Brightness depends on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely constant level of brightness.*2 Requires separately sold PN-ZB02 Interface Expansion Board. *3 Use a commercially available connection cable for PC and other video connections. *4 For both PC and AV components. *5 The analogue and component BNC terminals are switchable. Usethe menu to select. *6 Use a 3-pin compatible power outlet.InstallationLCD PanelMax. ResolutionMax. Display Colours (approx.)Pixel Pitch (H x V)Brightness* 1Contrast RatioViewing Angle (H/V)Active Screen Area (W x H)Response TimeBacklightComputer Input VideoSynchronisationPlug & PlayPower ManagementVideo Colour SystemInput Terminals*3 StandardVia Optional PN-ZB02 BoardOutput Terminals*3 StandardVia Optional PN-ZB02 BoardInput/Output Via Optional PN-ZB02 BoardTerminals*3MountingPower SupplyPower ConsumptionEnvironmental Operating TemperatureConditions Operating HumidityDimensions (W x D x H) (approx.)Weight (approx.; not including PN-ZB02)Main AccessoriesModel NameSpecificationsPN-V600APN-V601ALandscape / Portrait60-inch widescreen (152.4 cm diagonal) UV2 A LCD1,366 x 768 pixels16.77 million colours0.973 x 0.973 mm700 cd/m 2 450 cd/m 24,000 : 1176°/176° (CR 10)1,328.8 x 747.1 mm (52 5/ 8 " x 29 7 /16 ")6 ms (grey to grey, avg.)LED, full arrayAnalogue RGB (0.7 Vp-p) [75 Ω], Digital (conforms to DVI 1.0 standards)Horizontal/vertical separation (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative)VESA DDC2BVESA DPMS, DVI DMPMNTSC (3.58 MHz, 4.43 MHz)*2, PAL, PAL60, SECAMPC analogue: Mini D-sub 15-pin x 1, HDMI™ (1080p compatible) x 1* 4, 3.5 mm-diameter mini stereo jack x 1, RS-232C: D-sub 9-pin x 1, Control Kit jack x 1PC digital: DVI-D 24 pin (HDCP compatible) x 1, PC analogue: BNC x 1*5 , Video: BNC x 1, S-Video x 1, Component video: BNC (Y, Cb/Pb, Cr/Pr) x 1*5 ,Audio: RCA pin (L/R) x 2Audio: RCA pin (L/R) x 1, RS-232C: D-sub 9-pin x 1PC digital: DVI-D 24 pin x 1, External speaker 10W + 10W (6 Ω)LAN portVESA (6 points), 200 mm (7 7/ 8") pitch, M6 screw or VESA (4 points), 200 mm (7 7 /8 ") pitch, M6 screw100V – 240V AC, 50/60 Hz480W 310W0°C to 40°C20% to 80% RH (no condensation)1,335.9 x 149.3 x 754.2 mm (52 5/ 8 " x 5 7 /8 " x 29 11 /16 ") (Display only, not including protrusions)44 kg (96.9 lbs) 41 kg (90.4 lbs)AC power cord (3-pin*6 , approx. 3 m,) operation manual, CD-ROM, protection cover x 4, cable clamp x 2, bezel sheet (long/short) x 2 eachDESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMILicensing, LLC in the United States and other countries. All other brand names and product names may be trademarksor registered trademarks of their respective owners.(PN-V601A/V600A)Input/Output Terminals(standard)(option) PN-ZB02 Interface Expansion BoardDistributed by:© SHARP CORPORATION (NOV. 2013)

/ 4

Related manuals for Sharp PN-V600A