Sharp PN-H801 Setup Manual

Also see for PN-H801: Operation manual Setup manual

ENGLISH7 ETurning Power On/OffCaution• Turn on the monitor first before turning on the PC orplayback device.Turning on the main powerMain power switchCaution• The main power must be turned on/off with the main powerswitch. Do not connect/disconnect the power cord or turnthe breaker on/off while the main power switch is on.• When turning the power off and back on, always wait for atleast 5 seconds.• For a complete electrical disconnection, pull out the mainplug.Turning power on/offPress the POWER button or the POWER switch to turn thepower ON/OFF.Power switch Power LEDStatus Status of the monitorGreen lit Power onOrange lit Power off (Standby mode)Accessing the operation panelnOperation modeWhen the monitor is turned on for the first time after beingshipped from the factory, the operation mode setting screenwill be displayed. Set it to MODE1 or MODE2.MODE1 ... OFF IF NO OPERATION is set to ON, andPOWER SAVE MODE is set to ON. (These settingscan not be changed.)If there is no operation for 4 hours or more, themonitor automatically enters standby mode. Powerconsumption in standby mode is also minimized.MODE2 ... Will perform standard operation.OFF IF NO OPERATION is set to OFF, andPOWER SAVE MODE is set to ON. These settingscan be changed.Even after being set, changes can be made usingOPERATION MODE, located in the menu of the monitor. (SeeOPERATION MANUAL.)