Sharp PN-70TW3 Operation Manual

Also see for PN-60TW3: Operation manual Operation manual Operation manual

26E(3) Touch action settingTouch to disable touch action.Touch again to enable touch action.TIPS• When the input mode is changed, the disable touchaction setting is canceled.• When TOUCH OUTPUT INVALID ICON is set to ON andtouch action is disabled, the TOUCH OUTPUT INVALIDicon appears in the monitor.• You can touch the TOUCH OUTPUT INVALID icon in themonitor to enable touch action.• The position of the TOUCH OUTPUT INVALID icon canbe changed. (See page 35.)• The TOUCH OUTPUT INVALID icon appears even whena USB cable is not connected.(4) Exit touch menuCloses the touch menu.TIPS• The touch menu can also be used with the remote controlunit.(1) Hold down DISPLAY at least 5 seconds.The touch menu appears.(2) Select the setting item with .(3) Set with , and press ENTER.- The setting is entered.- Press RETURNto exit the touch menu.Using the remote control unit12 3458910761. INPUT (Input mode selection)The menu is displayed. Press or to select the inputmode, and press ENTER to enter.* For the input modes that can be selected, see “Using thetouch menu” (see page 25.).2. MUTETurns off the volume temporarily.Press the MUTE button again to turn the sound back to theprevious level.3. MENUDisplays and turns off the menu screen. (See page 29.)4. VOL +/- (Volume adjustment)Pressing or displays the VOLUME menu when themenu screen is not displayed.15Press or to adjust the volume of the sound.* If you do not press any buttons for about 4 seconds, theVOLUME menu automatically disappears.* You can also change the setting by touch action.Basic Operation