Sharp PN-425 Operation Manual

Also see for PN-425: Specifications Operation manual

E9Menu ItemsnDual screen displayYou can display the following screens simultaneously.• VIDEO and DIGITAL/ANALOG1/ANALOG2• VIDEO and COMPONENTSet this function with PIP MODES in the MODE SELECT 3menu. (See page 8.)PIPMain screenSubscreenA sub screen is displayedinside a main screen.PbyPMainscreenSubscreenA main screen and a subscreen are displayed in aline.PbyP2Main screen SubscreenDisplays a main screenwhich measures 1024pixels in the longerdirection and a subscreen in a line.* The currently selected input signal is displayed on the mainscreen.TIPS• You might infringe on a copyright of the author which isprotected by copyright law when you display the images ofthe computer screen and television/VCR simultaneously forprofit-making or to show the image to the public.• The screen size for dual-screen display is the same asthe screen size for single-screen display. The Dot by Dotscreen is displayed in NORMAL size except when it is setas the PIP main screen.• When dual-screen display is selected, the screen cannotbe enlarged. MONITOR settings cannot be changed either.nEnlarge• You can align several monitors and integrate them into asingle large screen to display.• Up to 4 monitors can be aligned in both the longer andshorter directions.• Each monitor displays enlarged views of separated images.(Example)Longer direction: 2 monitorsShorter direction: 2 monitorsLonger direction: 3 monitorsShorter direction: 2 monitorsSetting procedureIn the MODE SELECT 1 menu, set ENLARGE H/V andENLARGE-POS H/V. (See page 7.)1. Set the number of monitors aligned in the longerdirection in ENLARGE H.2. Set the number of monitors aligned in the shorterdirection in ENLARGE V.3. Set the section of the separated image to be displayedon each monitor in ENLARGE-POS H andENLARGE-POS V.In horizontal orientationENLARGE H(1,2)(1,3)(1,4)(2,2)(2,3)(2,4)(3,2)(3,3)(3,4)(4,2)(4,3)(4,4)(1,1)1(2,1)2(3,1)3(4,1)41234ENLARGE VIn vertical orientationENLARGE H(1,2)(1,3)(1,4)(2,2)(2,3)(2,4)(3,2)(3,3)(3,4)(4,2)(4,3)(4,4)(1,1)4(2,1)2(3,1)3(4,1)11234ENLARGE V* The numbers in parentheses are the setting values in(ENLARGE-POS H, ENLARGE-POS V) format.TIPS• Up to 4 monitors can be linked in daisy chain using PCanalog RGB output terminals.• For connections other than those indicated above, aseparate splitter for the video signal (commercially available)is required.• Dual-screen display is disabled when the enlargementfunction is used.• To cancel the enlargement, set “1” for ENLARGE H andENLARGE V respectively.