Sharp PG-C20X Operation Manual

Also see for Notevision PG-C20XU: Service manual Service manual Operation manual

Contents

E-13Setup & ConnectionsWhen connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) orMacintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.• Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.Connecting the ProjectorConnecting other compatible computers“Plug and Play” function• This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatiblecomputer will communicate their setting requirements, allowing for quick and easy setup.• Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.• The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer.Connecting the Projector to Video EquipmentYou can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisualequipment.CAUTION• Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and theequipment being connected.Connecting a video source (VCR, laser disc player, DTV decoder or DVD player)using the standard video input1 Connect one end of the S-video cable to the S-VIDEOINPUT 2 terminal, or one end of the video cable to theVIDEO INPUT 3 terminal on the projector and the videooutput terminal on the video source.2 To use the built-in audio system, connect the red andwhite RCA connectors to the corresponding red andwhite AUDIO INPUT terminals on the projector and theaudio output terminals on the video source.The S-VIDEO INPUT 2 terminal uses a video signal systemin which the picture is separated into a color and aluminance signal to realize a higher-quality image.• For higher quality video, you may use the S-VIDEO INPUT 2 terminal onthe projector. S-video cable is sold separately.• If your video equipment does not have an S-video output terminal, usethe composite video output terminal.1 Video cable (sold separately)2 Audio cable (sold separately)To audio output terminalsTo video output terminalTo S-video output terminalS-video cable (sold separately)ProjectorVCR,Laser disc player,DTV decoder orDVD playerL RAUDIO INPUTINPUT 3INPUT 2S-VIDEO VIDEO (S-VIDEO, VIDEO INPUT)