Sharp MD-DR470H Quick Start Manual
Also see for MD-DR470H: Operation manualOperation guideService manualQuick start guide
Contents |
RecordableClose OpenRecording preventedTINSE0514AWZZ03C R AO 1When you record on a MiniDisc,check that the erase prevention tab isset to the "Recordable" position.1Step2Step0101If you require any advice or assistance regardingyour Sharp product, please visit our web-sitewww.sharp.co.uk/customersupport.Customers without Internet access may telephone08705 274277 during office hours (or (01) 676 0648if telephoning from Ireland).Step12StepRIGHT LEFTRIGHT LEFTRed : to rightWhite : to leftSuppliedconnectioncableAC 230 V,50/60 HzTo thewall socketTo the DC IN5 V socket To the OPTICAL/LINE IN socketAC 230 V,50/60 HzTo thewall socketTo the DC IN5 V socketTo theMIC INsocketStereomicrophone(commerciallyavailable)32Insert according tothe direction arrow.1Hold ReleaseTo the /REMOTEsocket4-poleplugLeftchannelL RRightchannel-12dB -4dB 0dB0-30SP (Stereo recording)(2 times long recording)(4 times long recording)(Monaural recording)SP (Stereo recording)(2 times long recording)(4 times long recording)(Monaural recording)-12dB -4dB 0dBMIC L0 - MIC H30Press the button whilst in the stop mode.The power turns off after recorded contents have been updated on the MiniDisc.Refer to page 21 for details on TOC.Press the button.Recording will start.To stop recording, pressthe button.To stop recording, pressthe button.Press the MENU button.Press the or but-ton repeatedly to select"REC MODE".Press the MENU button.Press the or but-ton repeatedly to selectthe recording mode.Press the MENU button.Quick start guidefor recording (front) useful tips (back)123Insert a recordable MiniDisc1-BIT PORTABLE MINIDISC RECORDERMODELMD-DR470HSlide the OPEN lever to releasethe compartment door.Insert a MiniDisc as shown.Close the compartment door.Make sure the hold function is deactivated before recording.Connect a microphoneAbout the microphonePlug-in-power type microphoneRecord on a recordable MiniDiscRecording from a microphonePlaybackAny plug-in-power type microphones can be used.If the microphone is not a plug-in-power type, it may malfunction or be damaged.There are different types of microphones.Power is automatically supplied to the plug-in-power type microphone when con-nected to the unit. Other types are battery-powered or self-powered.Hold down the button for 2 secondsor more.The display changes every time youpress the button.(For details, refer to page 60 of the manual.)Connect the equipmentRecord on a recordable MiniDiscStereo etc.This is a connection for analogue recording.For connections to other equipment or for digital recording, refer to pages 14 and15 in the manual.Recording from other audio equipmentWhen recording from a CD or MiniDisc45Press the REC button.1Begin playback on thestereo system, the outputwill be recorded.678Select the recording mode.51234Press the REC button.Begin playback on thestereo system connectedto this portable MD.Adjust the recording level sothat the maximum sound vol-ume from the source makesthe reading swing somewherebetween -4 dB and 0 dB.Press the PAUSE button onthe stereo system to enterthe playback pause mode.Here you can search for thetrack to be recorded.Press the or buttonto adjust the recording level.2Adjust the recording level sothat the maximum sound vol-ume from the source makesthe reading swing somewherebetween -4 dB and 0 dB.Press the or buttonto adjust the recording level.12345Press the MENU button.Press the or but-ton repeatedly to select"REC MODE".Press the MENU button.Press the or but-ton repeatedly to selectthe recording mode.Select the recording mode.312345Press the button to startrecording.1 Press the button.2 To stop playback, press thebutton.To prevent the new recording from being lost, it is not possible to remove the Mini-Disc whilst "TOC" is displayed.To update the recorded contents of the MiniDiscTOC displayWhen recording stops, "TOC" appears. Whilst "TOC" appears, the MiniDisc record-ed contents have not yet been updated.Press the MENU button. |
Related manuals for Sharp MD-DR470H
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved