Sharp LL-S201A Operation Manual

Also see for LL-S201A: Operation manual Operation manual Operation manual Operation manual Operation manual

25 ESpecificationsnHDMI input terminal pins(HDMI TM Connector)No. Function No. Function1 TMDS data 2+ 11 TMDS clock shield2 TMDS data 2 shield 12 TMDS clock-3 TMDS data 2- 13 CEC4 TMDS data 1+ 14 N.C.5 TMDS data 1 shield 15 SCL6 TMDS data 1- 16 SDA7 TMDS data 0+ 17 DDC/CEC GND8 TMDS data 0 shield 18 +5V9 TMDS data 0- 19 Hot-plug detection10 TMDS clock+nDisplayPort input terminal pins(DisplayPort 20 pin)No. Function No. Function1 MainLane 3- 11 Gnd2 Gnd 12 MainLane 0+3 MainLane 3+ 13 Gnd4 MainLane 2- 14 Gnd5 Gnd 15 Aux +6 MainLane 2+ 16 Gnd7 MainLane 1- 17 Aux -8 Gnd 18 Hot-plug detection9 MainLane 1+ 19 Gnd10 MainLane 0- 20 3.3 VnSupported frequencyResolution Frame rate Remarks640×480 60Hz VGA800×600 60Hz SVGA1024×768 60Hz XGA720×480p 59.94/60Hz1280×720p 50/59.94/60Hz1920×1080p 50/59.94/60Hz720×576p 50Hz* All are compliant only with non-interlaced.* Each is scaled to 16:9 and displayed using the full screen.* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above isinput.nDDC (plug and play)The monitor supports the VESA DDC (Display Data Channel) standard.DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parametersis exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detectplug-and-play monitors.There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.

/ 26

Related manuals for Sharp LL-S201A