Sharp LC-80LE857U Operation Manual

Also see for LC-90LE657U: Technical specifications Setup guide Operation manual Setup guide Operation manual

Direct Button OperationPOWERD powE_DISPLAY(sou_c_)r=mc3STB DVD'VCR AUDIOC:3 _ C:3_ _ ORECC2_ C_ C3C23OPTION SLEEP AUDIO FREEZE@@@@@@@@@SmartCentraliiii!0;You can change channels in several ways.Method 1Using CH/VV on the remote control unit or on theW,Method 2Using remote control buttons 0-9, ®(DOT),Examples:To select a 1 or 2-digit channel number (e. g.,Channel 5}:Press 5 _ ENT.To select a 3-digit channel number (e. g., Channeltt5):Pressl_ I_5_ENT.To select a 4-digit channel number (e. g., Channel22.1):Press 2 2 _>• (DOT} 1 _ENT.Method 3Selecting the program from the Channel list,1 Press INPUT on the remote control unit,• The INPUT list displays.2 Press 4/i1_ to select "AIR" or "CABLE".• The Channel list displays.3 Press A/V to select the desired channel, andthen press ENTER,• When selecting a 1-digR channel number, R is notnecessary to press 0 before the number.• When you enter 0-9 only, channel selection will bemade if there is no operation within a few seconds.• if you push "0" by RseJf, nothing will happen.• Complete the above steps within a few seconds.• When you enter 0-9 and. (DOT), channel selection willbe made if there is no operation within a few seconds.You can change the volume by pressing VOL +/-on the TV or on the remote control unit.• To increase the volume, press VOL +.• To decrease the volume, press VOL-.Audio statusSpeaker Variable sound Mute• When "Output Select" is set to "Variable", the indicatoron the screen changes as shown below.Mutes the current sound output.Press MUTE,• "(_/" will be displayed on the screen for 30 minutes,and the sound is silenced.• Within 30 minutes of pressing MUTE, mute can becanceled by pressing VOL+/- or MUTE.• Mute will be canceled after 30 minutes have passed.However, the TV will not suddenly output a loud soundas the volume level is set to 0 automatically.Allows you to capture and freeze a moving imagethat you are watching.Press FREEZE•• A moving image is captured.• Press FREEZE again to cancel the function.• When this function is not available, "No displaying stillimage available." will display.• The still image automatically goes out after 30 minutes.• If you are using the freeze function and a broadcastactivates the V-CHIP BLOCK, the freeze functionwill be canceled and a V-CHIP BLOCK message willappear.• You can have the same settings by choosing "Freeze"on the menu items. (See page 26.)To view external source images, select the inputsource by pressing INPUT on the remote controlunit or on the lV.1 Press INPUT.• The INPUT list screen displays.2 Press ,_/_' or press INPUT again to select theinput source.• An image from the selected source automaticallydisplays.• Each time INPUT is pressed, the input sourcetoggles.• If the corresponding input is not plugged in, youcannot change the input. Be sure to connect theequipment beforehand.Press FLASHBACK to switch to the previouslytuned channel or previous input mode.• Press FLASHBACK again to swRch back to thecurrently tuned channel.• FLASHBACK will not work if no channel has beenchanged after the TV is turned on.Allows you to directly activate various types ofapplications.1 Press SmartCentral to display the applicationwindow.• Press SmartCentral again to display a list ofapplications by category.2 Press _l/l_(or A/V) to select the desiredapplication, and then press ENTER.• If you changed the display to the list ofapplications in step 1, select a category and thenan application. See page 49 for details.• if "_" is displayed after you switch to USB mode,check the USB connection.• if "a:_tJ' or "D_M" is displayed after you switch toHome Network mode or after you connect to theIntemet, check your TV's network settings andconnection.• See pages 36, 47 to 49 for details of viewableapplications.• You can display the application window by choosing"APPS" on the menu ferns. (See page 26.)• When this function is not available, "Can not operatethis function now" will display.• See pages 13 to 15 and 41 for external equipmentconnection._-18• See page 27 for details on the Output Select function.