Sharp LC-65D93U Operation Manual

Also see for LC-65D93U: Operation manual Operation manual

Contents

29DisableEnablePCMDolby DigitalPress MENU to exit.4Power ControlPower control setting allows you to save energy.No signal offWhen set to “Enable”, the power will automatically shutdown if there is no signal for 15 minutes. Audio SetupYou can output digital audio to an AV amplifier orsimilar device whose DIGITAL AUDIO INPUT terminalis connected to the DIGITAL AUDIO OUTPUT terminalon the TV. Please select an audio output formatcompatible with the audio format of the program youare watching and the equipment connected.NOTE• “Disable” is the factory preset value.• When a TV program finishes, this function may not operate.NOTE• “Disable” is the factory preset value.Press a/b to select “PCM” or “DolbyDigital”, and then press ENTER.Press MENU to display the MENU screen,and then press c/d to select “PowerControl”.Press a/b to select “No Signal Off”, andthen press ENTER.Press c/d to select “Enable”, and thenpress ENTER.• Five minutes before the power shuts down, theremaining time displays every minute.No operation offWhen set to “Enable”, the power will automatically shutdown if there is no operation for 3 hours.Press MENU to display the MENU screen,and then press c/d to select “PowerControl”.Press a/b to select “No Operation Off”, andthen press ENTER.Press c/d to select “Enable”, and thenpress ENTER.• Five minutes before the power shuts down, theremaining time displays every minute.Digital SetupThis setting allows you to optimize the settings ofDigital broadcasting.Press MENU to display the MENU screen,and then press c/d to select “DigitalSetup”.Press a/b to select “Audio Setup”, and thenpress ENTER.Basic adjustment settings132123132Selected itemPCMDolby DigitalDescriptionThe optical output terminal outputsaudio signal in PCM form. If yourdigital audio system does not supportDolby Digital, select “PCM”.The optical output terminal outputsaudio signal in Dolby Digital form.It reproduces sound from surroundprogram of digital.Press MENU to exit.4Press MENU to exit.4