SERVICE MANUALParts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining thesafety and performance of the set.This document has been published to be used forafter sales service only.The contents are subject to change without notice.SAFETY PRECAUTIONIMPORTANT SERVICE SAFETY PRE-CAUTION ............................................................iPRECAUTIONS A PRENDRE LORS DELA REPARATION ...............................................iiPRECAUTIONS FOR USING LEAD-FREESOLDER ........................................................... iiiOUTLINEMAJOR SERVICE PARTS ................................ivCHAPTER 1. SPECIFICATIONS[1] SPECIFICATIONS ......................................... 1-1CHAPTER 2. OPERATION MANUAL[1] OPERATION MANUAL .................................. 2-1CHAPTER 3. DIMENSIONS[1] DIMENSIONS ................................................ 3-1CHAPTER 4. REMOVING OF MAJOR PARTS[1] REMOVING OF MAJOR PARTS (LC-60LE660U/C6600U)....................................... 4-1[2] REMOVING OF MAJOR PARTS (LC-70LE660U/C6600U)....................................... 4-5[3] The location putting on the heat measuresheet .............................................................. 4-9[4] Precautions for assembly............................. 4-10CHAPTER 5. ADJUSTMENT[1] ADJUSTMENT PROCEDURE ......................5-1CHAPTER 6. TROUBLESHOOTING TABLE[1] Failure diagnosis by LED in front of cabinet........6-1[2] LED flashing specification at the time of anerror (Power and Timer icon LED used) ........6-1[3] TROUBLESHOOTING TABLE ......................6-4CHAPTER 7. MAJOR IC INFORMATIONS[1] MAJOR IC INFORMATIONS .........................7-1CHAPTER 8. OVERALL WIRING/SYSTEM BLOCKDIAGRAM[1] OVERALL WIRING DIAGRAM......................8-1[2] SYSTEM BLOCK DIAGRAM.........................8-2Parts GuideTopPageCONTENTSLC-60/70LE660U,C6600UNo. S84B1LC60LE66LC-60LE660ULC-60C6600ULC-70LE660ULC-70C6600ULCD COLOR TELEVISIONMODELSIn the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-inal condition and only parts identical to those specified should be used.1st EditionPravin MevadaPravin Mevada