Sharp LC-40LE830U Connection Manual

Also see for AQUOS LC-40LE830U: Operation manual Brochure Service manual Mode d'emploi

Connecting an Antenna/Cable1. A 75-ohm system is generallya round cable with F-typeconnector that can easily beattached to a terminal withouttools (commercially available).2. A 300-ohm system is a fl at“twin-lead” cable that can beattached to a 75-ohm terminalthrough a 300/75-ohm adapter(commercially available).3. A separate VHF/UHF antennahas two antenna cables. Usea combiner (commerciallyavailable) to connect the antennacables to a 75-ohm terminal.Coaxial cableHome Antennaterminal (75-ohm)300-ohmtwin-lead cable75-ohm coaxial cableIN OUTCombineror300/75-ohm adapterF-type connector300-ohmtwin-lead cable300-ohmtwin-lead cable75-ohmcoaxial cable (round)Cable TV lead-InConnecting an HD Cable/Satellite Set-top BoxFor information on the antenna type, see the operation manual of your TV.Connecting a Cable/Satellite Set-top BoxConnecting a Cable/Satellite Set-top Box and VCRThe above is a connection example. For information on connecting external equipment to theTV, see the operation manual of the equipment.Check the type of antenna cable you are using.(for receiving cable-TV without a set-top box, including unscrambled cable HD channels, oroff-air HDTV broadcasts)Connecting Multiple Devices to the TVBack panel surface inputsBack panelhorizontalinputsBack panelvertical inputsDVI OUTAUDIORGBorDVI-HDMI conversion cableø 3.5 mm stereominijack cableRGB cable(D-sub 15-pin cableor VGA cable)PCYou can use the VIDEO terminal with a component cable.Connecting an HD Cable/Satellite Set-top Box, Blu-ray Disc/DVD Player and AmplifierHDMIDIGITALAUDIODIGITALAUDIO TVHDMILINE OUTDIGITALAUDIO INOUTBack panelhorizontal inputsBack panelvertical inputsHD Cable/Satelliteset-top boxSplitterCableBlu-ray disc/DVD playerAmplifierorYou can connect the TVusing a splitter only whenthe connection involves acable set-top box. Whenyou use the satelliteset-top box, connect adedicated cable directly tothe satellite set-top box.Cables required:1 Coaxial cable2 HDMI-certifi ed cable3 Optical fi ber cableCables required:1 Coaxial cable2 Composite cableThe above is a connection example. For detailed information on the connection, see theoperation manual of the equipment.■ When using HDMI cable (HDMI 1, 2, 3 or 4):The HDMI (High Definition Multimedia Interface) terminal isan audio-video interface that enables a connection for audioand video signals using a single cable. The HDMI terminalsupports high-resolution video input.To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.INOUTVCRLINE OUTINOUTLINEOUTLINEINBack panelhorizontal inputsYou can connect the TV usinga splitter only when theconnection involves a cableset-top box. When you use thesatellite set-top box, connecta dedicated cable directly tothe satellite set-top box.Back panelsurface inputsCable/Satelliteset-top box SplitterVCR CableAUDIO-R (Red) VIDEO(Yellow)AUDIO-L (White)When connecting theTV without the use ofa cable/satellite set-top box, connect theantenna cable to theRF-IN terminal on theVCR.The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.ENGLISHINOUT LINE OUTVIDEO (Yellow)AUDIO-L (White)AUDIO-R (Red)Back panelsurface inputsCableBack panelvertical inputsHDMILINE OUTINOUTCable■ When using DVI-HDMI conversion cable (HDMI 1):When using a DVI-HDMI conversion cable, you shouldmake an analog audio connection. In this case, inaddition to connecting a DVI-HDMI conversion cable tothe HDMI 1 terminal, connect a ø 3.5 mm stereo minijackcable to the AUDIO IN terminal and set "Audio Select" to"HDMI+Analog".Back panelhorizontal inputsBack panelvertical inputsINOUT AUDIO DVILINE OUTCable■ When using Component cable (COMPONENT): Back panelsurface inputsINOUTCOMPONENT OUTAUDIO-R (Red)AUDIO-L (White)PR (Red) Y (Green)PB (Blue)CableWhen you connect external equipment using a DVI-HDMI conversioncable or when you connect ARC-compatible equipment, use HDMI 1.Connecting a PCThe above is a connection example. For information on connecting external equipment to theTV, see the operation manual of the equipment.

/ 4

Related manuals for Sharp AQUOS LC-40LE830U