Sharp LC-32SH10U Operation Manual

Also see for LC-32SH10U: Service manual

Contents

6Supplied accessoriesNOTE• Always use the AC cord supplied with the TV.Make sure the following accessories are provided with the product.Remote control unit ( X1)Page 8 Page 8 Page 7Page 7“AA” size battery (X2) AC cord ( X1)Cable Clamp ( X1) Operation manual ( X1)Stand unit ( X1)Page 6NOTE• To detach the stand, perform the steps in reverse order.Attaching the stand• Before attaching (or detaching) stand, unplug the AC cord from the AC input terminal.• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.QUICK REFERENCEhex keyLC-26SH10ULC-32SH10ULIQUID CRYSTAL TELEVISIONTÉLÉVISEUR ACLTELEVISOR CON PANTALLADE CRISTAL LÍQUIDOENGLISHFRAN ÇAISESPAÑOLOPERATION MANUALMODE D’EMPLOIMANUAL DE OPERACIÓNShort screwThis side faces the rear.7290000172 SHThis side faces the rear.121. Confirm the 8 screws supplied with the TV.3.1 Insert the stand into the opening on the bottom of theTV.2 Insert and tighten the 4 long screws into the 4 holes onthe rear of the TV.2. Attach the two parts of the stand unit to each other usingthe 4 short screws and the hex key (supplied with theproduct) as shown.Short screws (X4)(used in step 2)Long screws ( X4)(used in step 3)hex keyLong screwSoft cushionCAUTION• Attach the stand in the correct direction.• The “REAR” label should be visible from the back of the TV.• Incorrect installation of the stand may result in the TV falling over.• Be sure to follow the instructions.