PreparationConnecting HDMI equipmentYou can use the INPUT 4 or INPUT 5 terminal when connecting HDMI equipment.HDMI cable(commercially available)HDMI equipmentConnecting a PCWhen connecting to a PC with an analog RGB terminal. (INPUT 6)RGB cable(commercially available)Ø 3.5 mm stereo minijack cable(commercially available)When connecting to a PC with an HDMI terminal. (INPUT 4 or 5)PCHDMI cable(commercially available)PCPC compatibility chartIt is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 59 to set PC input signals.PC31.5 kHz31.5 kHz37.9 kHz37.5 kHz35.1 kHz37.9 kHz48.1 kHz46.9 kHz48.4 kHz56.5 kHz60.0 kHz47.7 kHz640 x 480720 x 400VGA800 x 600SVGAXGA 1024 x 768WXGA 1360 x 76870 Hz60 Hz72 Hz75 Hz56 Hz60 Hz72 Hz75 Hz60 Hz70 Hz75 Hz60 HzOOOOOOOOOOODDC is a registered trademark of Video Electronics Standards Association.Power Management is a registered trademark of Sun Microsystems, Inc.VGA and XGA are registered trademarks of International Business Machines Corp.PC Resolution Horizontal Frequency Vertical Frequency VESA Standard34NOTE• When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.• When receiving an incompatible signal, such as 1080p, the message below appears without the image on the screen.For an incompatible video signal: “An incompatible video signal has been received. Check the output device settings.”For an incompatible audio signal: “An incompatible audio signal has been received. Check the output device settings.”NOTE• The HDMI terminals only support digital signal.