Sharp KB-6014LW Installation Manual

Also see for Insight Pro KB-6015K: Operation manual Operation manual

Contents

installation manual

SPECIAL WARNINGINSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.IMPORTANT: SAVE THIS INSTALLATION MANUAL FOR LOCAL ELECTRICAL INSPECTOR’S USE.READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.CLEARANCES AND DIMENSIONSFor SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the statedclearances and dimensions on pages 2 and 3. See Figure 1 (for 24") or Figures 3 and 4 (for 30") .Microwave DrawerINSTALLATION MANUALUNPACKING YOUR MICROWAVE DRAWER• Remove all packingmaterials from insidethe Microwave Drawer.DO NOT REMOVETHE WAVEGUIDECOVER, which islocated on the topof the MicrowaveDrawer.• Remove the featuresticker, if there is one.Check the drawer forany damage, such asmisaligned or bentdrawer, damaged drawer seals and sealing surfaces, brokenor loose Microwave Drawer guides and dents inside the cavityor on the front side of the drawer. If there is any damage, donot operate the Microwave Drawer and contact your dealer ora SHARP AUTHORIZED SERVICER.IMPORTANT NOTES TO THE INSTALLER• Read all of the Installation Manual before installing theMicrowave Drawer.• Remove all packing material before connecting the electricalsupply.• Observe all governing codes and ordinances.• Be sure to leave these instructions with the consumer.IMPORTANT NOTES TO THE CONSUMERKeep this manual with your Operation Manual for futurereference.• As when using any microwave oven generating heat, there arecertain safety precautions you should follow. These are listedin the Operation Manual. Read all and follow carefully.• Be sure your Microwave Drawer is installed and groundedproperly by a qualified installer or service technician.IMPORTANT SAFETY INSTRUCTIONSIf the information in this manual is not followedexactly, a fire or electrical shock may result that could causeproperty damage, personal injury or death.To reduce the risk of tipping, the MicrowaveDrawer must be secured by a properly installed Anti-Tipblock.• This Microwave Drawer must be electrically grounded inaccordance with local codes.• Make sure the wall coverings and the cabinets around theMicrowave Drawer can withstand the heat generated by theMicrowave Drawer.Never leave children alone or unattended inthe area where a Microwave Drawer is in use. Never leave thedrawer open when the microwave is unattended.Stepping, leaning or sitting on the drawermay result in serious injuries and can also cause damage to theMicrowave Drawer.• Do not use the Microwave Drawer as a storage space.This creates a potentially hazardous situation.• Check that the time-of-day is in the display. If not, touchStop/Clear to prevent unintended use.1WaveguidecoverSealingsurfaceOvencavitySealingsurface

/ 4

Related manuals for Sharp Insight Pro KB-6015K