Sharp IM-DR410E Operation Manual

33IM-DR410E12345603/7/21 IM-DR410E_5.fmIM-DR410E TINSE0550AWZZAdvanced Features-Titling a MiniDisc-Master MiniDisc operation Operation of the MiniDisc for stampingNote:If the total number of tracks on the master MiniDisc doesnot match that on the MiniDisc for stamping, the unit willdisplay "Can'tSTAMP" and turn off.If this happens, adjust the total number of tracks on thenewly recorded MiniDisc using the edit operation.1 Insert a master MiniDisc.Do not mistake the master MiniDisc for the target one.2 Whilst in the stop mode, press the MENU/ENTER button.3 Press the or button repeatedly to se-lect "EDIT".4 Press the MENU/ENTER button.5 Press the or but-ton repeatedly to se-lect "NAME STAMP".6 Press the MENU/EN-TER button.To cancel the operation, press the :OFF/HOLD but-ton.7 Press the MENU/ENTER button.8 When the unit displays "CHANGE MD", re-move the master MiniDisc.Remove it without turning off the power. Or, the oper-ation will be cancelled.9 Load a MiniDisc for stamping.10 Press the MENU/ENTER button.The unit will finish recording the character informationand enter the stop mode.6