Sharp HT-SB32D Quick Start Manual

Also see for HT-SB32D: Operation manual Operation manual Operation manual

Remote control battery installationTINSEA348AWZZMODELHT-SB32DSOUND BAR HOME THEATRE SYSTEMThis Quick Start Guide will help you to correctly install and operate your system.Remote control × 1 RCA cable(2 pins - 2 pins) × 1AC power lead × 1 Foot cushion × 4AC/DC adaptor × 1 Wall mount angle × 2Nut(Spike + Nut) × 4(Length: 25 mm) Pattern paper × 1AccessoriesTurn on your systemBefore using remote controlBefore using remote control, please remove plasticshield at battery holder.Battery holderPlastic shieldRemote control1 Press the ON/STAND-BY button.The sound mode indicator and display light up. If thepower does not turn on, check whether the powercord is plugged in properly.2 To set the unit to stand-by mode:Press the ON/STAND-BY button again.The STAND-BY indicator turns red.Polarity (+) symbolPrinted in Malaysia11A R AS 11 Insert pin into the hole as shown and pull to open thebattery holder.Battery holderLocking tabBattery typePositive (+) side up2 Remove the old battery from the battery holder,insert the new battery and then slide the batteryholder back into the remote control.Back of remotecontrolPinAccessoriesMUTEON/STAND-BYMUSICCINEMANEWSSURROUNDBYPASSINPUTTVCHVOLVOLRRMCGA322AWSASOUND MODERemote control x 1 AC/DC adaptor x 1(RADPA100AWZZ)Optical cable x 1 Pattern paper x 1Velcro tape (hook type) x 1 Velcro tape (loop type) x 2HT-SB32DAC power lead x 1 NFC tag x 1Spike leg x 2Before using remote controlBefore using the remote control, remove theplastic shield from the battery holder.Remote control Plastic shieldBattery holderTurn on your systemPress the ON/STANDBY button.The On/Standby/Input indicator lights up according to inputsource:Input source On/Standby/InputindicatorOPTICAL IN Turns greenAUDIO IN Turns cyanBluetooth Turns blueNote:If the power does not turn on, check whether the power lead isplugged in properly.To set the sound bar to standby mode:Press the ON/STANDBY button again. The PAIRING indicatorturns BLUE.AC power connection1 Plug the AC power lead into the AC/DCadaptor.2 Plug the AC/DC adaptor cable into the DCINPUT socket on the sound bar.3 Plug the AC power lead into a wall socket. ThePAIRING indicator turns BLUE.14G R AS 1TINSEA474AWZZesoftw.barcodesoft.comSymbology: Code 93; Font Facename: Code93MHrEncode: TINSEA474AWZZe 8 : *TINSEA474AWZZI3*|e 10 : *TINSEA474AWZZI3*|Make sure to unplug the AC power lead beforemaking any connections.21AC/DC AdaptorCableDC IN socket(DC 19V)AC power leadAC/DC Adaptor(AC 100 - 240 V ~ 50/60 Hz)Wall socket

/ 2

Related manuals for Sharp HT-SB32D