Menu
Sharp GP1A173LCS3F Manual
          |
GP1A173LCS3F1Sheet No.: OP14021ENGP1A173LCS3F is a standard, low voltage operation,OPIC output, transmissive photointerrupter withopposing emitter and detector in a case, providingnon-contact sensing.For this family of devices, the emitter and detector areinserted in a case, and a 3-pin connector is included toallow remote-mount or off-board designs.1. Transmissive with OPIC output2. Highlights :Special position hooks compatible with 3 differentPlate thicknesses (1.0, 1.2, 1.6mm)Snap insertion3. Key Parameters :Low operating voltage : 2.7 to 5.5VGap Width : 5mmSlit Width (detector side) : 0.5mmPackage : 17 × 12.8 × 8mm (without connectorand hooks)Connector : Tyco Electronics JAPAN G.K.(173977-3 and 179228-3)4. RoHS directive compliant1. Compliant with RoHS directive (2002/95/EC)1. General purpose detection of object presence ormotion.Example : PPC, FAX, PrinterDescriptionFeaturesAgency approvals/ComplianceApplicationsGap : 5.0mm, Slit : 0.5mm,Low voltage operation,*OPIC Output, Snap-in typeCompact TransmissivePhotointerrupter with connectorGP1A173LCS3F*”OPIC”(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element anda signal-processing |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved