357. Downloading the contents of the IRC programming tosatellites — masterWhen you have completed or changed the IRC programming, distribute the IRC preset datafrom the master to all satellites in the IRC system.(1) Initial downloadingFor initial setup of the IRC system, use this downloading method. The preset data in themaster is downloaded to each satellite, when the existing preset data in the satellite iscleared.1. Enter the PGM2 mode.2. Select “INITIAL D/L” and press the [ENTER] key.The INITIAL D/L menu will open.3. In order to distribute all preset data files in the masterto satellites, select “ALL PGM” and press the [ENTER]key.In order to distribute an individual preset data file,select the corresponding item and press the [ENTER]key.For initial downloading of PLU preset data, it isnecessary to enter the code range and machinenumbers to receive the data.NOTE: “25 ALL PGM” will clear the satellite’stotalizers.4. If you wish to download the IRC programming data toall satellites, select “ALL” and press the [ENTER] key.If you wish to download the data to certain satellite(s),select “MACHINE SELECT” and press the [ENTER]key. In this case, the “MACHINE SELECT” menu willopen. Move the cursor to the machine numbers andselect “YES.”NOTECheck the contents of the programming of all the satellites in the IRC system that have receivedthe preset data.
