Sharp ER-A770 Dealer Knowledge Book

Also see for ER-A770: Instruction manual Instruction manual Instruction manual Manual Installation manual

Contents

PrPrPrPrProoooogggggrrrrrammingammingammingammingammingPage / 9Designs and specifications are subject to change without notice.1. Device Configuration - CAT#2:Place the ER-A770 into SRV mode:1) Select 2 SETTING2) Select 1 DEVICE ASSIGN3) Select 15 CAT#24) Set the Channel No. followed by depressing the [ENTER] key.Note: the RS-232 port which the Debitek Card Reader is physically connected (Refer to pg. 2).*** for this example CH#1 is used.5) Depress [CANCEL] to exit to the SRV SETTING Sub-Menu.6) Depress [CANCEL] again to exit to the SRV MODE Sub-Menu.7) Depress [MODE] to exit to the REG MODE.SRV MODE PROGRAMMING1 2 3 41 2 3 42. SRV Mode System Presets:Place the ER-A770 into SRV mode;1) Select 2 SETTING2) Select 2 SYSTEM PRESET3) Set the following values;a) Job#906: = 0xxxb) Job#916: = x4xx