Menu
Sharp DR-P350 User Manual
                                                                                                                                                |
6Automatically Store Radio StationsRather than manually storing stations, you can also let the unitautomatically store found stations:• Press and hold / button to do auto scanning for the broadcastingradio channels, press it again to stop auto scanning.RDS (Radio Data System)This product is equipped with an RDS decoder. RDS allows text informationto be transmitted by a radio station together with the audio broadcast. Thistext information can include name of the radio station, name of the currentprogram or song, news headlines, etc. and may vary from station to station.To view RDS info press the INFO button repeatedly.DAB OperationDigital Audio Broadcasting (DAB) is a way of broadcasting radio digitallythrough a network of transmitter. It provides you with more choice, bettersound quality and more information.Press [SOURCE] button repeatedly to select the DAB source, in DAB mode,press [MENU] button and the display will show "FULL SCAN", press /to confirm operation.Then press TUNING or button to select the menu options as below,press / to confirm operation.• [Full scan]: scan and store all the available DAB radio stations.• [Manual tune]: tune to a DAB station manually.• [DRC]: select (dynamic range control) DRC /off.• [Prune]: remove all the invalid stations from the station list.• [System]: adjust system settings,for details please refer to the FM system.To Select a desired radio station by pressing the TUNING andbutton and then press the / button to play the selected station.Manually Store Radio Stations FOR DABThis unit enables you to store up to 20 radio stations:1. Tune to a radio station which you would like to store.2. Press and hold for 2 seconds the / button,The display will showPreset Store.3. Select a desired preset (1 - 20) on which you want to store the currentfrequency by pressing the TUNING or button.4. Press the / button to confirm your setting. "STORED" will beshown in the display.5. To recall a stored frequency, press / buttons until you reachthe desired preset. Alternatively you can press the / button, selectthe desired preset using the TUNING / buttons and playing theselected preset by pressing the / button.Info DisplayTo display information (if broadcast by station) repeatedly press the INFObuton on the unit.TroubleshootingBEFORE RESORTING TO MAINTENANCE SERVICE, PLEASEKINDLY CHECK BY YOURSELF WITH THE FOLLOWING CHART.No PowerReason• The AC adaptor is not connected to the power supply or is not connec-ted to a power supply securely.Solution• Please check that the AC adaptor is connected securely.No Sound (There is no sound or the sound is distorted.)Reason• The earphone cables connected securely.• The volume is set to the minimum level.• The sound is switched off.Solution• Pull out the earphone cables from the earphone socket on the unit.• Turn up the volume.The buttons on the unit doesn't work.Reason• The unit is being interfered with static electricity etc.Solution• Switch off and unplug the unit.• Then connect the plug to the power supply and switch it on again. |
Related manuals for Sharp DR-P350
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved