Menu
Sharp Carousel RK94S27F Installation Instructions Manual
                |
E 1For Sharp Carousel® Built-in KitModels RK94S27F or RK94S30FS = STAINLESSTHIS KIT IS UL APPROVED TO ALLOW CERTAIN MICROWAVEOVENS TO BE INSTALLED ABOVE ANY ELECTRIC WALL OVEN.PLEASE SEE THE OPERATION MANUAL REGARDING APPROVEDBUILT-IN APPLICATIONS.IMPORTANT:This Built-in Kit is designed for and approved only for thoseSharp Microwave Ovens specifying Built-In Kit RK94S27F orRK94S30F. Refer to Operation Manual for approved models.IMPORTANT NOTES TO THE INSTALLER• PLEASE READ THESE INSTRUCTIONS THOROUGHLYBEFORE BEGINNING INSTALLATION.• Observe all governing codes, ordinances, and safetyinstructions.• Be sure to leave these instructions with the consumer.• Be sure to DISCONNECT THE PLUG of the microwaveoven from the electrical outlet before installing the Built-inKit. Remove the Carousel turntable from the oven cavity.• Because the kit includes metal parts, due caution shouldbe used in handling and installation to avoid the possibilityof injury.ITEM PART NAME QTYA DUCT (A)-1: PDUC-0259WRW0 1B DUCT (A)-2: PDUC-B127MRP0 1C DUCT (A)-3: PDUC-A734WRW0 1D DUCT (B): PDUC-0260WRW0 1E DUCT (C): PDUC-A274WRW0 1F BOTTOM DUCT ASSEMBLY:FDUC-B099MRK1A 1G M3.9-16MM PAN HEAD TAPPINGSCREW, ZINC: XOPS740P16000 8H WOOD SCREW: XTSS740P20000 2I CABINET SCREW: XOTS740P12000 10INSTALLATION INSTRUCTIONSITEM PART NAME QTYJFRONT FRAMERK94S27F: FDECAB229MRK0RK94S30F: FDECAB227MRK01KBACK FRAMERK94S27F: FDECAB255MRK0RK94S30F: FDECAB226MRK01LAIR DEFLECTORRK94S27F: PREF-B038MRP0RK94S30F: PREF-B039MRP02Check list for parts when unpacking.NOTE: (J) FRONT FRAME and (K) BACK FRAME are shippedattached. Snap apart before installation.AFGHIJKLBCDEDUCT (A)-1DUCT (A)-2DUCT (A)-3DUCT (B)DUCT (C) |
Related manuals for Sharp Carousel RK94S27F
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved