Sharp CP-SW1000H Quick Start Manual

Also see for CP-SW1000H: Operation manual Operation manual

Contents

Locking tabBack of remote controlTINSEA210AWZZ07H R AS 1This Quick Start Guide will help you to correctly install and operate your system.MODELCP-SW1000HSUBWOOFER SYSTEMAccessoriesRCA cable(2 pins - 2 pins) x 1AC power lead x 1Spike x 4Before using remote controlBefore using remote control, please remove plastic shieldat battery holder.Remote control battery installation1 Whilst pushing the locking tab towards the centre ofthe remote control, slide out the battery holder.2 Remove the old battery from the battery holder, insertthe new battery and then slide the battery holder backinto the remote control.Use the “CR 2025”, coin lithium battery.Turn on your system1 Press the ON/STAND-BY button to turn the power on.The volume indicator lights up blue.2 To set the unit to stand-by mode:Press the ON/STAND-BY button again.The STAND-BY indicator lights up red.Battery holderLocking tabPositive (+)side upPolarity (+)symbolBattery typeBattery holderPlastic shieldRemote controlRemote control x 1Cleaning cloth x 1 Subwooferstand x 2 Foot cushion x 4(Lightsup blue)(Turns red)RCA cable(1 pin - 2 pins) x 1

/ 2

Related manuals for Sharp CP-SW1000H

Sharp CP-AWS0101 Quick Start Manual

Sharp CP-SW1000H Operation Manual

Sharp CP-SW1000W Operation Manual

Sharp HT-SBW202 User Manual

This manual is suitable for:

CP-SW1000H

Sharp CP-SW1000H Quick Start Manual

Product

Learn More

Legal