Sharp CE-E Service Manual

Contents

SHARP -CE-1600ESERVICE MANUAL1. SPECIFICATIONSModel:Product name:Power source:Power required:Batlery operating time:Temperature:Dimensions:Weight:Accessories:Optional Accessories:Usable Printers:CE-1600EParallel and pocket disk interface7.5V DC supplied by five AA batleries oroptional AC adaptor (EA-160)2.8Wapprox. 50 minutes using manganesebatleries approx. 120 minutes usingalkaline batleries (at 20°C with a CE-1600Fconnected while continuously writing andreading a 4 K-byte prägram at 5 secondintervals)1Q°C - 35°C320mm(W) x 123mm(D) x 40mm(H)approx. 640g (includes batleries)AA batleries (5), screws (XBBSD20P05000, PRICE RANK: AA) (2), OperationManual (1)EA-158C (printer cable)EA-160 (AC adaptor)CE-1600F (pocket disk drive)SHARP CE-515P, CE-516P, CE-700PEPSON FX-80See the operation manual for your printerfor information on electrical requirementsand printable characters.Be sure to confirm compatibility (e.g. byreferring to the printer's manual) beforeuse for any printer no listed above.2. SYSTEM ORGANIZATIONThe entire system is shown below.CE-1600F(optional)Printer(optional)EA-158C, (optional)"",,,,(, pti~~CODE: OOZCE1600f:SMEMODEL CE-1600EPARALLEL AND POCKET DISK INTERFACE(FOR PC-1600)3. NAME OF EACH PART AND ITSUSE®Pocket disk driveconnector(50-pin)@ Adaptor plugNote: The interface does not have apower switch. The power isswitched together with the power switch of the connectedcomputer. Disconnecting the computer turns off the powerfor the interface.CD Computer connectorConnects the computer (PC-1600).®Printer connectorConnects a printer through the printer cable (EA-158C).®Pocket disk drive connectorConnects the pocket disk drive (CE-1600F)@ Adaptor plugConnects the AC adaptor (EA-160)4. POWER SUPPLYSize AA batleries (or an adaptor) are required in the interface tooperate the disk drive.When the IBAIT I symbol is shown on the top right of the computer'sdisplay, the batlery vohage is low. Replace the batleries in theinterface early.Note: The interface and computer both supply power alternately.Thus, operation is possible if power is available from eitherone. However, the disk drive's motor operates from the powersupplied by the interface.5. ERROR CODESThe interface issues error code 69 during an error.ErrorCode DescriptionPrinter is not connected. Printer is not on. Printer69 is out of paper. Other printer related errorconditions.SHARP CORPORATION