Sharp CD-MPX870 Operation Manual

Also see for CD-MPX870W: Service manual

03/12/19 CD-MPX870 33-42.fmE-35CD-MPX870WCD-MPX870ENGLISHAdvanced FeaturesTimer and sleep operation (Remote control only) (continued)Note:Checking the timer setting in the timer stand-by mode:Canceling the timer setting in the timer stand-by mode:Reusing the memorized timer setting:The timer setting will be memorized once it is entered. To reuse thesame setting, perform the following operations.12 When the preset time is reached, playback or recordingwill start.The volume will increase gradually until it reaches the presetvolume.13 When the timer end time is reached, the system will enterthe power stand-by mode automatically.Once timer:The timer will be canceled.Daily timer:The timer will operate at the same time every day. It will con-tinue until the daily timer setting is canceled. Cancel the dailytimer when it is not in use.When performing timer playback or recording using another unit con-nected to the GAME INPUT jacks, select "GAME" in step 9.This unit will turn on or enter the power stand-by mode automatically,however, the connected unit will not turn on or off.1 Press the CLOCK/TIMER button.2 Within 10 seconds, press the or button to select"ONCE" or "DAILY", and press the MEMORY button.3 Within 10 seconds, press the or button to select"ONCE CALL" or "DAILY CALL", and press the MEMORY button.The unit returns to the timer stand-by mode after displaying thesettings in order.1 Press the CLOCK/TIMER button.2 Within 10 seconds, press the or button to select"ONCE" or "DAILY", and press the MEMORY button.3 Within 10 seconds, press the or button to select"ONCE OFF" or "DAILY OFF", and press the MEMORY button.Timer will be canceled (the setting will not be canceled).1 Turn the power on and press the CLOCK/TIMER button.2 Within 10 seconds, press the or button to select"ONCE" or "DAILY", and press the MEMORY button.3 Within 10 seconds, press the or button to select"ONCE ON" or "DAILY ON", and press the MEMORY button.4 Press the ON/STAND-BY button to enter the power stand-bymode.