Sharp CD-BK3200V Operation Manual

Also see for CD-BK3200V: Operation manual Service manual

E-18CD-BK3200V(X)E2.fm01/5/29ENGLISHCD-BK3200VVideo CD Playback- Playback of a Video CD (CDs) with P. B. C. (Version 2.0) -To interrupt playback:Press the button on the remote control.To resume playback from the same point, press the /SELECT/RESUME button.To stop the current operation and return to the menu:Press the ( /RETURN) button for less than 0.5 seconds.To completely stop the video CD:Hold down the ( /RETURN) button for more than 1 second.To exchange other video CDs whilst playing a disc:Press the disc eject button for any stopped video CD from 1 to 6 andexchange discs.To remove the video CDs:Whilst in the stop mode, press the disc eject button for any video CD from 1 to6 to remove the disc.After use:Press the ON/STAND-BY button to enter the power stand-by mode.Notes:z Playback control allows a video CD to be played back according to instructionsrecorded on the disc. The "previous", "next", "return" and "select" operations mayfunction differently, depending on the PBC CDs.z Some video CDs with playback control may have an "auto pause" recorded onthem. When such a disc is played, the screen will stop automatically at the pointwhere an "auto pause signal" has been inserted.z If the picture looks dirty when a video CD is played back, there may be a scratchon the video CD. Replace it with another video CD in good condition.The P.B.C. function will not work in the following conditions.z When repeat, random, programme, bookmark, resume, disc digest, track digest ortime search play has been selected and playback begins.z When track numbers are selected using the direct search, the / (NEXT )or / ( PREV.) button, and playback begins.Ñ To move the menu screen (menu screenwith more than 1 page)Notes:z This function may not work, depending on the disc.z The PREV. or NEXT button on the remote control allows you to locate thedesired portion.Ñ To play without activating the playbackcontrol functionYou can play a video CD with P.B.C. without activating the playback control function.In this case, the menu screen will not appear, and the disc will be played in the sameway as a video CD without P.B.C.Notes:z The P.B.C. function can also be cancelled whilst in the playback mode.z Some video CDs with P.B.C. cannot be played back when the P.B.C. mode is off.z See pages 19 - 26 to perform various playback functions without activating theP.B.C. function.8 Select the desired menu number using the direct search buttonson the remote control.z Playback will begin.z After playback has finished, the menu will reappear. Select the menu numberyou want to play.To move to the next menu screen:Whilst in the stop mode, press the / button.To return to the previous menu screen:Whilst in the stop mode, press the / button.1 Whilst in the stop mode, press the P.B.C. (P.B.C. AUTO/OFF) but-ton to cancel the P.B.C. mode.The P.B.C. function cannot be cancelled whilst the menu screen is displayed.2 Press the ( /SELECT/RESUME) button.Playback will begin from track 1 on the DISC 1. When the last track on the DISC6 has finished playing, the unit will stop automatically.PBC OFFDownloaded from: http://www.usersmanualguide.com/