Sharp Aquos LC-57D90U Operation Manual

Also see for Aquos LC 57D90U: Specifications Operation manual Operation manual

Useful adjustment settingsPress MENU and the MENU screen displays.Press INPUT to select INPUT5.DVI input signal settingPress INPUT.• A list of selectable sources appears.l~ <5 COLE I. OBltK ~rVOL CHSURROUND j+) (JMUTEat::! v aSelecting input sourceUse this menu to select the input source.Press INPUT again to select the input source.• An image from the selected sourceautomatically displays.• You can also select the in put source bypressing Ja/'•.• If the corresponding input is not plugged in,you cannot change the input. Be sure toconnect the equipment beforehand.Selecting input signal typeFor setting the signal type of external equipmentconnected to INPUT 1 and INPUT 2 terminals.Press MENU and the MENU screen displays.Press ..... /~ to select "Option".Press .. IT to select "Input Select", and thenpress ENTER.Press ...../~ to select "Option".Press .. IT to select "Input Select", and thenpress ENTER.Press ..r" to select the signal type you wantto set, and then press ENTER.• If the selected signal type is incorrect, an imagedoes not display or no color image displays.Press .. IT to select the equipmentconnected to INPUT '5 terminal, and thenpress ENTER.Press MENU to exit. Press MENU to exit.• If you set INPUT1 and INPUT2 to Auto, the TV willautomatically select the input signal.• Check the operation manual of the external equipmentfor the signal type.• Setting INPUT 1 and INPUT 2 signal selection to "Auto"when other equipment is connected will result in thefollowing connection priority.1. COMPONENT VIDEO2.VIDEO@-46