PC-MV10 Series Quick Setup GuideThank you for your purchasing a SHARP PC-MV10 Series personal computer.Follow the instructions below to use the computer for the first time.1. Be sure to check all the following items are included:• Notebook Computer• AC Adapter• AC Power Cord• Battery Pack• Modem Cable• Core for a LAN cable• Parallel Cable Adapter• Weight Saver• Recovery CD-ROMs Pack• Windows Quick Start Guide• Operation Manual2. Install the battery pack into thecomputer.1. Place the computer upside down.2. Insert the battery pack into the computer bymatching the projected parts of the battery to thenotched parts on the computer.3. Push the battery pack until you hear the clickingsound.3. Connect the computer to AC power.1. Plug the AC adapter cable to the AC adapter jackon the left side of your computer.2. Plug the AC power cord into the AC adapter.3. Plug the AC power cord into a wall outlet.• Always use the AC adapter included with the computerorthe optional one (may not be available in some countries).Using other AC adapters may damage the compute.• Always hold the AC power cord by its plug when removingit from the wall outlet. Never pull on the cord.• When using the computer for the first time, be sure toconnect it to AC power. If using the battery instead, youmay not be able to complete the Windows setup if thebattery does not have enough power.Notched PartProjected Part Carefully inspect each component to make sure nothing ismissing or damaged. If any of these items is missing ordamaged, notify your dealer immediately. Be sure to save theshipping materials and carton in case you need to ship or storethe computer in the future. Attach the included core to your LAN cable to insurecompliance with requirements of EMC regulations forcomputing equipment. Some brochures or supplements may be contained other thanthe above.Please turn over andgo to the next sectionTINSE3424ACZZ 2AC Adapter JackAC AdapterTo WallOutletAC Power Cord