Sharp AY-XPM7FR Operation Manual

Also see for AY-XP12GHR: Operation manual Service manual

Contents

ENGLISHGB-15SWINGCLEANFANMODESET/C1hDISPLAY1 Press the TIMER ON ( ) button.2 The TIMER ON indicator will blink; press theTIME ADVANCE or REVERSE buttons toset the desired time. (The time can be set in10-minute increments.)3 Point the remote control at the signal receiverwindow on the unit and press the TIMER SET(SET/C) button.• The orange TIMER lamp ( ) on the unit willlight.• The unit will generate a beep when it receives thesignal.4 Select the operation condition.• If unit(s) is/are operated in one mode while TIMERON is set with another unit in different mode, thetimer may not activate the required operation.• The unit will turn on prior to the set time to allowthe room to reach the desired temperature by theprogrammed time. (Awaking function)Example:To stop operation at 11:00 p.m. and resume opera-tion (With the same mode and temperature set-tings) to bring the room temperature to the desiredlevel by 7:00 a.m.1 Set the TIMER OFF to 11:00 p.m. during opera-tion.2 Set the TIMER ON to 7:00 a.m.The arrow ( or ) between the TIMER ON indi-cator and the TIMER OFF indicator shows whichtimer will activate first.NOTES:• You cannot programmed the ON-TIMER and OFF-TIMER to operate the unit at different tem-peratures or other settings.• Either timer can be programmed to activate prior the other.You can use the ON and OFF timers in combination.COMBINED USE OF ON AND OFF TIMERS213TIMER ON