HOW TO USE THE FAX FUNCTION4-24You can avoid wasting paper by using the Anti Junk Fax function. This function preventsthe reception of faxes from up to ten specified parties.To turn the Anti Junk Fax feature on and off, use the following procedure:Factory setting: 2 (OFF)Step Press these keys Comments1 “ANTI JUNK FAX” will appear in thedisplay.2 “ANTI JUNK SELECT” will appear inthe display.3 Turn Anti Junk Fax on or off.4 Press the STOP key twice to exit.To cancel a timer operation:If you need to cancel a timer operation after it has been set, follow the steps below:If the timer operation is a transmission operation, you will need to know the numberassigned to it. If you do not remember the number (it appears in the display when youset the operation), print out the Timer List. See “Printing Out Reports” in this chapter fordetails on how to print out the Timer List.Step Press these keys Comments1 “TIMER MODE” will appear in thedisplay.2 Select “CLEAR”. “ENTER # (1-3)” willappear in the display.3 Enter the 1-digit number assigned tothe operation.(example)4 “CLEARED” will appear in the display.5 Press the STOP key twice to exit.FUNCTIONABCSTOP STOPENTERAnti Junk FaxFUNCTIONENTERABCorMNOSTOP STOPSpecial Functions
