Sharp AQUOS LC-32DV28UT Operation Manual

Also see for AQUOS LC-26DV28UT: Operation manual

Contents

Watching TVAuto C h MemoryAuto Ch Memory makes the TV/DVD look for allchannels viewable in the set area.1 Press TV MENU and the MENU screen displays.345Press A/T to select "Channel", then press _ or ENTER.Press ,_/T to select "Auto Ch Memory", then press _ orENTER.Press A/T to select "Signal Type", then press _/_ toselect "Cable" or "Air".Press A/T to select "Automatic Search", then press _ orENTER.The TV will begin memorizing all the channels availablein your area.,, It may take from 15 minutes to 30 minutes to completememorizing digital cable channels.Depending on the reception condition, a bar displaymay not advance for several minutes, please bepatient.Memorizing channels is best accomplished duringevening "PRtMETIME" hours, as more stations arebroadcasting digital signals. Memorizing channels canonly be accomplished while a station is broadcasting adigital signal to set that channel into memory.New digital channels may be added to your areaperiodically, it is recommended to perform the "AutomaticSearch" procedure regularly.Skipping stored channelYou can set channel selection disabled using CH A/v1 Press TV MENU and the MENU screen displays.2 Press ,_/T to select"Channel", then press _ or ENTER.3 Press ,_/T to select"Add/Delete", then press _ orENTER.4 Press A/T to select"Add/Delete", then press _ orENTER.5 Press ,_/,v to select the channel that you want to skip.6 Press _/_ to select"Delete" for selected channel.7 Press EXIT to return to the normal screen.Display the channel informationPress DISPLAY to display the current channel (orinput source) information on the screen.When the TV receives a digital signal, the digitalinformation will appear for a few seconds.,, Channel number ,, Station name, Channel label (if preset) , Broadcast program name, V-Chip rating , Signal type, Sleep timer , Audio language, Program guide , Picture size, ResolutionWhen the TV receives an analog signal, the analoginformation will appear., Channel number, V-Chip rating,, Sleep timer, Picture sizeChannel label (if preset)Signal type• Audio information (Stereo,SAP or Mono)ResolutionSetting MTS/SAP stereo modeThe TV/DVD has a feature that allows reception ofsound other than the main audio for the program.This feature is called Multi-channel Television Sound(MTS). The TV/DVD with MTS can receive monosound, stereo sound and Secondary Audio Programs(SAP). The SAP feature allows a TV/DVD station tobroadcast other information, which could be audio inanother language or something completely differentlike weather information.You can enjoy Hi-Fi stereo sound or SAPbroadcasts where available.= Stereo broadcastsView programs like live sporting events, shows andconcerts in dynamic stereo sound., SAP broadcastsReceive TV broadcasts in either MAIN or SAP sound.MAIN sound: The normal program soundtrack (either inmono or stereo).SAP sound: Listen to a second language, supplementarycommentary or other information. (SAP is mono sound.)If stereo sound is difficult to hear,, Obtain a clearer sound by manually switching to fixedmono-sound mode., To add a digital channel you are watching:Select a channel you want to add. Then select "AddingChannel" in step 4, press _ or ENTER., To release the skipping channel:Select "Add" in step 6.All channels are deleted from the channel memory.1 Press TV MENU and the MENU screen displays.2 Press ,_/T to select"Channel", then press _ or ENTER.3 Press A/T to select"Add/Delete", then press _ orENTER.4 Press ,_/T to select "Clear All", then press _ or ENTER.5 Press EXIT to return to the normal screen.• MTS only operates while in TV mode.• MTS is available only when receiving analogbroadcasting, not when receiving digital broadcasting., When the TV receives a stereo or SAP broadcast, theword "Stereo" or "SAP" displays on-screen if you pressDISPLAY.Changing MTSYou can change MTS as shown below to match thetelevision broadcast signal.1 In analog TV mode, press AUDIO and the"Audio"menu screen displays. "MTS" will be highlighted.2 Press AUDIO again or _/_- to select "Stereo","SAP" or "Mono".3 Press EXIT to return to the normal screen.(_=21