Sharp AN-PR1000H Quick Start Manual

Also see for AN-PR1000H: Operation manual Operation manual

TINSEA148AWZZ06G R AS 1STEMlp you to correctly install and operate your system.1xrevocssalgp1xemarflateM emarflateM8xsnoihsuc1xflehsssalG5xspilceriW2xseriwytefaS4xsrehsaW1xdaelrewopCA1xlaireaMFyrettabezis"AAA"61-PH,30R,4-MU(2x)ralimisroAC power lead x 1( for users in Australia only )Batteries not includedfor users in Australia1. Pull up both speakers outwards. 2. Pre-fasten the screw to the speaker box.3. Follow below steps to fix the metal frame.Insert the metal frame in a slant position andsecure it onto the screws.Pull up the other side of the metal frame toposition and tighten all screws.4.Turn the unit. Stick the metal frame cushion onto the metalframe and place the glass shelf on top of it.Notes:It is advisable for the top glass cover to be carried by 2 persons.Top glass with sticker on its surface, must face upwards.Metal frame must not be removed to ensure safety..ProtectionsheetTop glass cover cushionMetal frame cushionGlass shelfTop glass coverSticker up sideSticker up side2 Installing the main unit and the subwooferAfter checking all the connections have been made correctly, connectthe AC power lead to the AC power input socket, then to the wall socket.Speaker wireSpeaker terminalWall socket(AC 220 V - 240 V,50 Hz)(for users inAustralia only)Press the ON/STAND-BY button.If the power does not turn on, check whether the power lead is plugged in properly.To set the unit to stand-by mode:Press the ON/STAND-BY button again.Note:After the unit enters the power stand-by mode, wait a few seconds to turn on again.3 Subwoofer connection4 Connecting the AC power lead5 To turn the power on8/25/06, 11:23 AM

/ 1

Related manuals for Sharp AN-PR1000H