Sharp AN-52AG2 Operation Manual

E-4Installing the Based Bracket to the WallBased bracket assemblyAssemble based brackets A and B as shown in the illustration following the procedure givenbelow and secure the brackets with the 16 screws C (M6, 10mm).1Information Regarding Based Bracket AssemblyWhen installing in an LCD television with a bracket pitch of 400mmApplicable models: LC-52RX1W, LC-46RX1W, LC-42RX1WUse one of the following assembly configurations to assemble the basedbracket in accordance with the height of the LCD television to be installed. Foreach configuration, follow the stamped instruction marks (See below) on basedbrackets A and B to assemble the bracket.Assembly configuration (1)Height: Standard (The height can be changed +5cmafter the bracket is installed to the wall.)Based bracket A: Stamped mark CBased bracket B: Stamped mark AAssembly configuration (2)Height: +5cm (The height can be changed -5cm afterthe bracket is installed to the wall.)Based bracket A: Stamped mark CBased bracket B: Stamped mark B163mm163mmBased bracket BBased bracket ABased bracket ABased bracket BBased bracket ABased bracket B