Sharp AM-300 Quick Setup Manual

Also see for AM-300: Instructions Online guide

AM-300/400QUICK SETUP GUIDEAM-400 only: Connect the phone line cordto the TEL. LINE jack and a wall jack.Italy: Use the provided adapter to connect theline cord to the wall socket.17Attach the trays.3Load paper.Make sure you have the following items. If anyare missing, contact your dealer or retailer.Note: The shape of the line cord plug varies bycountry. An adapter (not shown) is provided insome countries.1. Remove the output tray.456 Install the toner cartridge and drum cartridge.2. Remove the drum cartridge from itspackaging.4. Remove the toner cartridge from itspackaging. Shake the cartridge sideto side four or five times to distributethe toner evenly within thecartridge.3. Insert the drum cartridge,sliding it along the guides.5. Insert the toner cartridge, sliding it alongthe guidesuntil it clicks into place.7. Press to select “YES” andthen press . (This resetsthe toner cartridge counter.)8. Reset the drum cartridge counter:a.Press once and then oruntil “LIFE” appears in thedisplay.b. Press and then .c. Press repeatedly to exit.MENU ZA6. Close the front cover ➊ andthen the side cover ➋.PRINTED IN THAILAND (TCADH3785XHZZ)Display:1:YES, 2:NOTONER EXCHANGED?2. Insert a stack of paperinto the tray, print side up.1. Press ➊. Open the side cover➋ and then the front cover ➌.Important:Pull the scanner release toward you torelease the scanner lock.Caution: Be sure to release the scanner lockbefore plugging in the power cord.Plug the power cord into a standard, earthedpower outlet.Note: The power outlet must be installednear the equipment and must be easilyaccessible.2123Caution!Do not touch the fusing unitunder the side cover after themachine has been in operation,as it may become very hot.Grasp this handle topush the cartridge inPress on the arrowmark to make surethe cartridge clicksinto place21TonercartridgeTelephone linecord (AM-400only)DrumcartridgeCD-ROMSetupGuideDocumentfeeder trayOutput trayWhen the traystops, lift theend slightlyand push in.3. Squeeze the sides of the paperguide and slide it to the slot forthe length of paper loaded.4. Replace the output tray.TEL.LINETEL.SETFor detailed instructionson setting up and using the AM-300/400, see theonline guide on the CD-ROM.To open the guide, double-click the Manual folder onthe CD-ROM, double-click English, and then double-click Online Manual.pdf.(Note: Acrobat Reader 5.05 or higher is required toview the manual.To install Version 5.05, double-clickAcrobat Reader, English, and then ar505enu.exeon the CD-ROM.)All company names and product names appearing in thissetup guide are the trademarks of their respective owners.EnglishAM-400 only: Set the date and timethat appear in the fax mode display.1. In the date and time display of fax mode(press if needed to select faxmode), press , , .2. Enter a two-digit number for the day("01" to "31").Example: the 5th• To clear a mistake press .3. Enter a 2-digit number for the month.Example: February4. Enter the year (four digits)Example:FAXMENUZ85. Enter a two-digit number for the hour(00 to 23) and a two-digit number forthe minute (00 to 59).Example: 9:256. Press .7. Press repeatedly to exit.ENTERThe stack shouldnot be higherthan this lineNote: Theshape of thepower plugvaries bycountryNote: Theshape of theline cord plugvaries bycountry.

/ 2

Related manuals for Sharp AM-300