Menu
Sealey VS2005 Instructions Manual
  |
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properlymaintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGEAND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.InSTrucTIonS for:DIESEL INJECTOR PULLERCITROEN / PEUGEOTMoDEL no: VS20051. SAFETY INSTRUCTIONS2. INTRODUCTION & CONTENTS WARNING! Ensure Health and Safety, local authority and generalworkshop practice regulations are adhered to when using tools. WARNING! Always use caution when working around fuelsystems. The fuel in the fuel rail may be pressurised even ifthe engine is not running. IMPORTANT: These instructions are provided as a guide only.Always refer to the vehicle manufacturer’s service instructions,or a proprietary manual, to establish the current procedure anddata, also any warnings or cautions particular to the vehicle. DO NOT use the set if any parts are missing or damaged. DO NOT use this tool for any purpose other than that for which it isdesigned. Switch off vehicle's ignition and disconnect the battery beforecommencing work under the bonnet. You must follow the vehicle's service manual cautions whenworking around the air bag system. If the cautions are notfollowed the air bag may deploy unexpectedly even after theignition is turned ‘off’, resulting in personal injury. never lay tools on the vehicle's battery. This may short theterminals together, causing harm to yourself, the tools, or thebattery. operate in a well ventilated area. Do not inhale fuel vapours. Wear approved eye protection. A full range of personal safetyequipment is available from your Sealey dealer. Wear suitable clothing to avoid snagging. Do not wear jewelleryand tie back long hair. Keep children and other unauthorised persons away from theworking area. Keep yourself, tools, and test equipment away from hot engine parts. Always keep a fire extinguisher close by, that is suitable for fuel/electrical/chemical fires. NEVER smoke or have open flames near vehicle. Always relieve fuel pressure before disconnecting fuel lines frominjectors. use a rag to cover fuel line fittings, when connecting ordisconnecting fuel lines. Avoid contact with fuel. clean up all fuel spills immediately and dispose of all rags properly. Maintain the tool components in good and clean condition for bestand safest performance. When work on the vehicle is finished, ensure all connections onvehicle are restored, and that there are no tools left in the enginebay. replace tools in the carrying case and store in a safe, dry,childproof location.comprehensive set for removing citroen/Peugeot 2.0/2.2HDi 16v fuelinjectors. Allows the removal of seized injectors without the need toremove the cylinder head. Bridge fits perfectly on the cylinder headpreventing damage to the area surrounding the injector. Supplied incarry-case.Contents: (refer to fig.1)Item Description1 Bridge2 3 x Bridge Legs3 2 x force Screws - Thread 17mm, 25mm x Pitch 1mm4 force Screw nut5 Injector Sockets 25mm, 29mm6 Security Hex Key - ½"sq. drivefig.2fig.1Original Language Version VS2005 Issue: 3 - 28/02/12 |
Related manuals for Sealey VS2005
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved