Sealey TS01 Instructions Manual

instructions forsheet metal folder vice / benchmountingmodel no: ts01thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safety9 Wear approved safety goggles, gloves, and footwear, when operating the folder. Your local sealey dealer offers a complete range ofsafety equipment.9 use the tool only for its intended purpose.9 regularly check all parts of the folder for damaged parts. do not use if any of its components are broken, worn or damaged.9 use original sealey spare parts and accessories. use of non-recommended spare parts may be dangerous and will invalidate warranty.9 ensure good footing, wear non slip footwear.8 do not operate this tool while under the influence of drugs, alcohol or other impairing medication.8 do not Allow unqualified persons to operate the metal folder. Keep children away from the tool.2. introductionBench and vice mounting sheet metal folder, fitted with mounting plates. Capable of bending a 2mm steel sheet up to and beyond a 90° angle.the unique patented endless design and removable folding plate allows the user to fold, channel and offset any length of sheet metal. Withadjustable fold plate to help achieve the cleanest fold possible. ideal for the small garage or restoration operation.3. specificationmodel no:...................................................................... TS01Width: ......................................................................... 700mmcapacity: .................................. 14 Gauge Sheet, Ø2mm Rodfigure 11. .......................................................... top/Base plate clamp2 ................................................ Adjustment/Positioning cam3 ..................................................... removable folding Plate4 .......................................................... centre adjustment nut5 .............................................................................. top Plate6 ................................................... Foot plate with fixing holes7 ................................................................... folding Handles4. operation4.1. Unpack the unit and check that all parts are included and not damaged. Should you experience a problem contact your supplierimmediately.4.2. Position folder on bench where it is to be mounted, ensuring that the handles (fig.1.7) hang vertically over the front of the bench, usefoot plates (fig.1.6) as templates to drill holes in bench, use appropriate fixings.4.3. or clamp folder in vice .4.4. By using centre adjustment nut (fig.1.4) ensure top and base plate are parallel, this may require adjustment from time to time.4.5. Release clamps (fig.1.1) at either end of folder so that a small test piece of sheet metal can be inserted between the top and basetS01 | Issue 1 13/06/16Original Language Version© Jack sealey limitedrefer toinstructionsfig.116273 4 5Wear ProtectiveGlovesWear safetyfootwearWear eyeProtection

/ 2

Related manuals for Sealey 5054511006186