Sealey SB1 Quick Start Quide

Soundbar WireleSS rechargeableModel no: Sb1Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.iMporTanT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SafeTy1.1. general9 Read instructions before use9 Indoor use only8 do noT leave batteries in a discharged state. Before storage remove batteries.1.2. baTTery SafeTy Warning! To reduce the risk of burns or fire:8 do noT attempt to open the batteries.8 do noT crush, puncture, short contacts or dispose of in fire or water.8 do noT expose to temperatures above 60°C (140°F).9 Recycle or dispose of used batteries as stipulated by local regulation.9 If the electrolyte in the batteries gets on your skin or in eyes, rinse thoroughly with cool water and seek immediate medical attention.2. inTroducTionStylish and modern sound bar is finished in a nicely painted anthracite grey. Can play your favourite music easily from your smart phoneor tablet either by wireless technology, AUX in via an AUX cable (1mtr AUX cable supplied) or even takes a micro SD card. (Micro SD notsupplied). 2 Channel sound bar includes a pair of 2” speakers and 1 vibrating diaphragm for added sound quality. Base is mounted on 2 sturdyfeet with high grip foam pads which helps dampen any vibration. Charges from a USB cable. (USB cable included).3. SpecificaTionBattery: ................................................................ 3.7V 1.5AhCharging Time:..................................................................2hrModel no: ....................................................................... SB1nett Weight: ................................................................... 790gRunning Time (min): ..........................................................4hrSpeaker output: ......................................................RMS: 6W4. operaTion4.1. connecTionS4.2. WireleSS connecTion4.2.1. To pair the SB1 with your Smartphone or other Wirelessenabled device turn on the speaker. Enable the wirelessfunction on your smartphone or other wireless enabled deviceand hit scan for SB1. When found choose it from the list.If prompted to, input password, use password 0000. Oncesuccessfully paired, select the SB1 from the list of paired devicesand select to connect.fig.2fig.1fig.3Micro Sd CardSB1 Issue 2 (1) 04/04/19Original Language Version© Jack Sealey limitedRefer toinstructions

/ 2

This manual is suitable for:

SB1

Sealey SB1 Quick Start Quide

Product

Learn More

Legal