Menu
Sealey RB951 Instructions Manual
   |
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructionsand properly maintained, give you years of trouble free performance.1. SAFETY INSTRUCTIONSIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS ANDCAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAYCAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.1.1 GENERAL SAFETYFamiliarise yourself with this product's application and limitations, as well as any specific potential hazards peculiar to the beacon.Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty.DO NOT use the beacon for any purpose other than for which it is designed.DO NOT allow children to operate the beacon.DO NOT operate the beacon if any parts are missing or damaged as this may cause failure or possible personal injury.When not in use switch the beacon off and where appropriate remove plug from power supply.2. TECHNICAL SPECIFICATIONSVoltage:...................................................................................12V-24V dcType of Bulb:.................................................H1 12V 55W - H1 24V 55WIndex of protection (EN 60598-1):.....................................................IP56Operating Temperature:....................................................-30°C to +50°CRadio Interference Filter:.......................... ......... EC95/54 EMC approvedRotational Speed:...........................................................160 rpm nominalApprovals:......................................................................................ECE653 . INTRODUCTION AND FIxINGModel No’s: RB951, RB952, RB953, RB954, RB955.Instructions for:ROTATING BEACONS12/24Voltvarious fittings● Sealey rotating beacons are designed to meet the strictest European standards.● European, British, and local laws must be observed when using the beacon.● Heavy-duty ABS base.● Quick release UV stable dome will not fade in prolonged sunlight.● Supplied with 12V and 24V bulbs.● Reverse polarity protected.RB951ø128mmOverall height: 200mmLength of mounting: 40mmRB952ø170mmHeight: 140mmRB953ø165mmHeight: 235mmRB955ø165mmHeight: 235mm3.1 RB951: 12mm Single Bolt FixingFixing Instructions:3.1.1 Drill a 13mm mounting hole in a suitable point on the vehicle.3.1.2 Connect to cables of at least 2mm² section and use an 8Amp fuse; check polarities.3.1.3 Fix the beacon by using nuts and washers according to the type and shape of the mountingsurface.RB951,RB952,RB953,RB954,RB955 Issue: 1 -10/10/12© Jack Sealey Ltd Original Language Versionø128mmHeight: 170mmRB954 |
Related manuals for Sealey 5051747726499
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved